Operation Manual

TRENDnet User’s Guide

TEW-732BR

Create your Wireless security Passphrase (password or key):

• Passphrase: Enter the passphrase.

• This is the password or key that is used to connect your computer to this router

wirelessly

• Confirmed Passphrase: Re-enter the passphrase.

Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)

The following section outlines options when selecting EAP (Extensive Authentication

Protocol),

EAP (Extensible Authentication Protocol) is also called Remote Authentication Dial-In

User Service or RADIUS.

Select a Cipher Type

o When selecting WPA security, it is recommended to use TKIP.

o When selecting WPA-Auto security, it is recommended to use AES.

o When selecting WPA2 security, it is recommended to use AES.

• RADIUS Server ½: Configure the RADIUS server settings.

Note: RADIUS Server 2 is optional and can be configured as a backup if there are any

issues with RADIUS Server 1.

o IP: Enter the IP address of the RADIUS server. (e.g. 192.168.10.250)

o Port: Enter the port your RADIUS server is configured to use for RADIUS

authentication.

Note: It is recommended to use port 1812.

o Shared Secret – Enter the shared secret used to authorize your router with your

RADIUS server.

Connect wireless devices to your router

A variety of wireless network devices can connect to your wireless network such as:

• Gaming Consoles

• Internet enabled TVs

• Network media players

• Smart Phones

• Wireless Laptop computers

• Wireless IP cameras

Each device may have its own software utility for searching and connecting to available

wireless networks, therefore, you must refer to the User’s Manual/Guide of your

wireless client device to determine how to search and connect to this router’s wireless

network.

See the “Appendix” on page 42 for general information on connecting to a wireless

network.