Operation Manual

TRENDnet User’s Guide

TEW-718BRM

Create schedules

Maintenance > Time Schedule

For additional security control, your router allows you to create schedules to specify a

time period when a feature on your router should be activated and deactivated. Before

you use the scheduling feature on your router, ensure that your router system time is

configured correctly. See page 36

to configure the system time.

Note: You can apply a predefined schedule to the following features:

• Wireless

• Virtual Server

• Packet Filters

• QoS

Create a schedule to define the days/time period when a feature should be active or

inactive:

1. Log into your router management page (see “Access your router management page”

on page 35

2. Click on Maintenance, and click on Time Schedule.

3. Next to Schedule, check the Enable option.

4. Click Apply at the bottom of the page.

5. Next to a schedule entry, click Add New.

6. Next to Name of Rule #, enter a name for the schedule.

7. Next to Policy, select the type of policy.

Note: This setting will determine how the schedule function should operate the feature it

is applied.

• Deactivate – Choosing this policy type will activate or enable the feature during

the day/time schedule specified and deactivate or disable the feature anytime

other day/times outside of the specified schedule.

• Activate – Choosing this policy type will deactivate or disable the feature

during the day/time schedule specified and activate or enable the feature

anytime other day/times outside of the specified schedule.

8. Next to one of the entries, click Week Day and choose the day you would like to apply

the schedule. In the Start Time (hh:mm) field, enter the start time. (e.g. 05:00) and in

the End Time (hh:mm) field, enter the end time. (e.g.15:00).

Time Range: 00:00 (12:00AM) - 23:59 (11:59PM)

Note: Under Week Day, you can choose every day to apply the schedule to every day of

the week.

9. To save changes, click Apply.

10. Apply the schedule to one of the applicable features (Wireless, Virtual Server, Packet

Filters, or QoS) in the drop-down list option Use Rule#.