Operation Manual

TRENDnet User’s Guide

TEW-718BRM

• Smart Quality of Service (QoS) controls to allocate bandwidth to: Gaming, Chat,

VoIP, P2P, Video, and Web Access

• Advance Firewall protection with Network Address Translation (NAT), Stateful

Packet Inspection (SPI), and WAN stealth mode

• Supports Internet Group Multicast Protocol IGMPv1/2/3 proxy and snooping

for multicast applications

• Access Control: Virtual Servers, MAC / IP Packet Filters, URL / Keyword Filters,

Demilitarized Zone (DMZ) host, PPTP / L2TP / IPsec VPN pass through

• Supports static and dynamic RIP v1/2 routing

• Dynamic DNS support

• Universal Plug and Play (UPnP) for auto discovery and support for device

configuration of Internet applications

• Local / remote management via Web browser, upgrade firmware, and backup /

restore configuration

• Supports TR069 remote management (CPE and ACS support)

• Device monitoring using modem and router logs, email alerts, and SNMP v1/2c

support

*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual

data throughput and coverage will vary depending on interference, network traffic, building

materials and other conditions.

Product Hardware Features

Rear View

• Power Port – Connect the included power adapter from your modem router

power port and to an available power outlet.

Note: Use only the adapter that came with your router.

• LAN Ports – Connect Network cables (also called network cables) from your

modem router LAN ports to your wired network devices.

• ADSL WAN Port (RJ-11 telephone port) –Connect an RJ-11 telephone cable

from your modem router ADSL WAN port to your telephone jack/DSL line.

• Antenna – The antenna broadcast wireless network signals.

ADSL

WAN Port

2dBi Detachable Antenna

Power

Port

LAN

Ports