TRENDnet User’s Guide Cover Page
TRENDnet User’s Guide Table of Contents Contents Product Overview ............................................................................ 1 Package Contents........................................................................................................ 1 Features ...................................................................................................................... 1 Installing your Wireless Adapter ......................................................
TEW-648UBM TRENDnet User’s Guide Features Product Overview TRENDnet’s Micro N150 Wireless USB Adapter, model TEW-648UBM, connects a laptop or desktop computer to a high-speed WiFi N network. Seamlessly stream video, download files, and play games with this ultra-compact wireless n adapter. WiFi Multimedia Quality of Service prioritizes important video, audio, and gaming traffic.
TEW-648UBM TRENDnet User’s Guide Installing your Wireless Adapter This section describes how to install the software driver for the wireless adapter. 2. At the CD Autorun Prompt window, click Run Autorun.exe. Note: If the Autorun prompt does not appear automatically, open the CD contents and double-click Autorun.exe. At the CD-ROM main menu, click Install Drivers. Windows® OS Installation Supported operating systems: Windows® 10, 8.
TEW-648UBM TRENDnet User’s Guide 3. Select a language preference from the options provided. 4. Follow the InstallShield Wizard Instructions. 5. You will be prompted to accept the end user license agreement. Select I accept the terms of the license agreement and click Next. 6. Wait for the driver installation to complete. This may take a few minutes. Note: If you do not receive a security prompt, continue to the next step. If prompted, click Install this driver software anyway.
TEW-648UBM TRENDnet User’s Guide 7. Click Finish to restart the computer. Link/Activity LED Blinking On steady blinking LED means that the network adapter has : A been successfully installed. the LED is blinking fast, the network adapter is Fast Blinking : When transmitting or receiving data. Off the LED is off, the network adapter has not been : When correctly installed. 9. Click on the wireless icon in the taskbar located in the bottom right corner. 8.
TEW-648UBM TRENDnet User’s Guide 10. Click on the wireless network you would like to connect and click Connect. 11. Enter the WiFi Key (password) and click Next. . 12. The status will display “Connected” to indicate a successful connection. Note: If the connected message does not display, double check your WiFi key (password) and re-enter it. © Copyright 2017 TRENDnet. All Rights Reserved.
TEW-648UBM TRENDnet User’s Guide Mac® OS Installation 3. Open the folder according to the Mac® OS version you are running. For Mac® OS 10.710.12, the folder will be named “Mac OS 10.7-10.12”. Supported operating systems: Mac® OS 10.7-10.12 For any updates, please check the TRENDnet website www.trendnet.com. 1. Insert the included CD-ROM into your computer’s CD-ROM drive. Note: If you do not have the included CD-ROM, you can download the utility and drivers from http://www.trendnet.com/support/ 4.
TEW-648UBM TRENDnet User’s Guide 5. At the Introduction window, click Continue. 6. At the Read Me window, click Continue. © Copyright 2017 TRENDnet. All Rights Reserved.
TEW-648UBM TRENDnet User’s Guide 7.At the License Agreement window, click Continue. 9.At the Install window, click Install. 8. When prompted, click Agree. © Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide 10. When prompted, enter your Mac® user account password to authorize the install, click Install Software. TEW-648UBM 12. Once the installation is complete, you will be prompted to restart the computer. Click Restart to restart your computer. 11. When prompted, click Continue Installation. © Copyright 2017 TRENDnet. All Rights Reserved.
TEW-648UBM TRENDnet User’s Guide 13. After the computer is rebooted, plug the Wireless N USB Adapter into an available USB slot on your computer. 15. After the driver is successfully installed and wireless adapter is connected, a wireless adapter icon will appear in the top menu bar. Click on the icon in the top menu bar. 17. Enter the WiFi Key (password) and click Join. 18. The wireless adapter icon will change to green WiFi bars to indicate a successful connection.
TEW-648UBM TRENDnet User’s Guide Connect to your wireless network using WPS 2. Click the network you would like to connect. Leave this window open. WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless router/access point supports WPS, you can use this feature to easily connect wireless devices to your network.
TEW-648UBM TRENDnet User’s Guide Mac® OS WPS connection using the built in utility (Virtual Push Button) 1 On your wireless router/access point, push the WPS button. Note: Typically, the WPS button hold time is 3-5 sec., then release. For TRENDnet routers/access points, the WPS hardware push button hold time is 3 seconds. If you are using another brand device, you may need to refer to your device documentation for WPS operation. 4. The status will display “Connected” to indicate a successful connection.
TRENDnet User’s Guide TEW-648UBM 5. In the WPS window, click PBC to activate WPS. 6. A series of status messages will appear. Wait for the WPS process to complete. 7. A status message will appear to indicate a successful connection. Note: If the WPS process fails, you will receive not receive a message “Connected”. You may need to attempt the WPS process again. Please refer to your wireless router/access point documentation regarding the operation of WPS. © Copyright 2017 TRENDnet. All Rights Reserved.
TEW-648UBM TRENDnet User’s Guide Technical Specifications Interface USB 2.0 Standards IEEE 802.11b IEEE 802.11g IEEE 802.11n Power Consumption Receive: 90mA (max.) Transmit: 250mA (max.) Supported OS Windows® 10 (32/64-bit), 8.1 (32/64-bit), 8 (32/64-bit), 7 (32/64-bit) Mac OS® 10.7-10.12 Antenna Built-in on board antenna Frequency 2.4 ~ 2.48GHz Modulation OFDM, DSSS Data Rate 802.11b: up to 11Mbps 802.11g: up to 54Mbps 802.11n: up to 150Mbps Receiving Sensitivity 802.
TRENDnet User’s Guide Troubleshooting Q: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do? Answer: 1. For Windows® 10/8.1/8/7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the “Search programs and files” box, and type D:\Autorun.exe, where “D” in “D:\Autorun.
TEW-648UBM TRENDnet User’s Guide Appendix Much of the older 802.11a or 802.11g hardware has been upgraded (with How to choose the type of security for your wireless network firmware/driver upgrades) to support this encryption standard. Total wireless Setting up wireless security is very important. Leaving your wireless network open and unsecure could expose your entire network and personal files to outsiders.
TEW-648UBM TRENDnet User’s Guide Open or Shared \ WEP – Enter the WEP key for your wireless network. Wireless network has WEP security enabled, open or shared. Please note that the Key Index 1-4 must also match the same index configured on the wireless router/access point. WEP Key Format HEX ASCII Character set 0-9 & A-F, a-f only Alphanumeric (a,b,C,?,*, /,1,2, etc.
TEW-648UBM TRENDnet User’s Guide d. Then click Obtain an IP address automatically and click OK. Windows® XP a. Go into the Control Panel, double-click the Network Connections icon b. Right-click the Local Area Connection icon and the click Properties. c. Click Internet Protocol (TCP/IP) and click Properties. d. Then click Obtain an IP address automatically and click OK. Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance. Windows XP 1.
TEW-648UBM TRENDnet User’s Guide Federal Communication Commission Interference Statement RoHS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Limited Warranty TRENDnet User’s Guide Limited Warranty TRENDnet warrants only to the original purchaser of this product from a TRENDnet In the event that, after evaluation, TRENDnet cannot replace the defective product or there is no comparable model available, we will refund the depreciated value of the product. authorized reseller or distributor that this product will be free from defects in material and workmanship under normal use and service.
Limited Warranty TRENDnet User’s Guide shipping from outside of the USA and Canada are responsible for any return shipping LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW, TRENDNET ALSO and/or customs charges, including but not limited to, duty, tax, and other fees.
