FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications.
INTRODUCTION Thank you for choosing the 10/100/1000Mbps Gigabit Ethernet Card for 32-bit PCI Bus-equipped personal computers. The 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card is ideal for speeding up data transfers for network servers and other computers, such as those used for video-conferencing, that send and/or receive large amounts of data.
Gigabit Ethernet & Auto MDI-X u u u u u u u Supports IEEE802.1Q VLAN tagging Supports 10/100/1000Mbps Auto-negotiation operation Full Duplex support for 10/100/1000Mbps data rates Auto MDI-II/MDI-X crossover for all three speeds Built-in FIFO (8K/64K) buffers reduces overhead of memory transfers 802.
environments, Gigabit Ethernet provides a straightforward upgrade without wasting a company’s existing investment in hardware, software, and trained personnel. The increased speed and extra bandwidth offered by Gigabit Ethernet is essential to coping with the network bottlenecks that frequently develop as computers and their busses get faster and more users use applications that generate more traffic.
fueling the need for high performance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and improve client/server response times. Among them, 100BASE-T (Fast Ethernet) provides a non-disruptive, smooth evolution from the current 10BASE-T technology. The non-disruptive and smooth evolution nature, and the dominating potential market base, virtually guarantee cost effective and high performance Fast Ethernet solutions in the years to come.
UNPACKING AND INSTALLATION This chapter provides unpacking and installation information for the 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card. Unpacking CAUTION: Under ordinary circumstances, the 32-bit PCI 10/100/1000Mbps NWay Gigabit Ethernet Card will not be affected by static charge as may be received through your body during handling of the unit. However, there are special circumstances where you may carry an extraordinarily high static charge, and possibly damage the card and/or your computer.
l One 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card. l One CD or Diskette. If any item is found missing or damaged, please contact your local reseller for replacement. Installing the Gigabit Ethernet Card 1. Shut down the computer, unplugs its power cord, and remove the chassis cover. 2. Insert the contact edge of the Gigabit Ethernet card into the connector of any available PCI Bus Master expansion slot.
4. Cover the computer’s chassis. 5. Switch computer power on. If the BIOS section of your computer’s boot program is Plug-and-Play compliant, then at power-up the BIOS will automatically configure any newly installed the Gigabit Ethernet Card. NOTE: Due to a fault in some Plug-n-Play BIOS programs, it happens occasionally that a newly installed adapter is assigned an Interrupt Number which is already assigned to another device.
/100/1000Mbps Gigabit Ethernet Card will adjust the correct signal automatically. Software Installation Before you connect the 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card to the network, you have to install the network driver first. The driver for each networking operating system is under a separate directory. Under Windows System, you can execute the file "setup.exe" to install driver automatically. You can also install drivers manually.
LED INDICATORS Two LED indicators: Link, Activity. Link Indicator This indicator lights green when the Gigabit Card is connects to 10/100/1000Mbps Gigabit Ethernet Network. Activity Indicator (ACT) This indicator blinking green will be transmitting or received data on the network.
TECHNICAL SPECIFICATIONS General Standards Protocol Data Transfer Rate Topology Network Cables LED Indicator RJ-45 Port IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3x Flow Control CSMA/CD Ethernet: 10Mbps (half), 20Mbps (full) Fast Ethernet: 100Mbps (half), 200Mbps (full) Gigabit Ethernet: 1000Mbps, 2000Mbps (full) Star Ethernet: 2-pair UTP Cat. 3,4,5 , EIA/TIA- 568 STP Fast Ethernet: 2-pair UTP Cat.
11
12
