Ÿ 24-Port 10/100Mbps Web Smart Switch TEG-424WS Ÿ Quick Installation Guide (1) TEG-424WS (V2) / 08.06.
1. Before You Start Package Contents Ÿ TEG-424WS Ÿ Multi-Language Quick Installation Guide Ÿ CD-ROM (Utility and User's Guide) Ÿ Power cord Ÿ Rack mount kit Minimum Requirements Ÿ Computer with an Ethernet port and web browser Ÿ Network cable Optional Equipment Ÿ EIA standard 19” rack Ÿ SFP modules (e.g.
2. Hardware Installation and Configuration 1 2 3. Assign a static IP address to your computer's network adapter in the subnet of 192.168.10.x (e.g. 192.168.10.25) and a subnet mask of 255.255.255.0. 4. Open your web browser, type the IP address of the switch in the address bar, and then press Enter. The default IP address is 192.168.10.200. 5. Enter the User name and Password, and then click Login. By default: User Name: admin Password: admin Note: User Name and Password are case sensitive.
6. Click System and then click IPv4 Setup. 7. Configure the switch to match the requirements of your network. Then click Apply. 8. Click OK. Note: 1. If you would like to easily discover all the Web Management Switches on the network, assign IP address, change password, then install the Web Smart Switch Management Utility. Follow the steps provided on the user's guide. 2. To download the latest version of the user's guide and the utility, please go to http://www.trendnet.
Company Information: Company Name: TRENDnet, Inc.
TEG-424WS Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service. Specific warranty periods are listed on each of the respective product pages on the TRENDnet website. Garantie Limitée TRENDnet garantit ses produits contre les problèmes de matériel ou de fabrication, dans des conditions normales d'utilisation et de service. Les périodes de garanties précises sont mentionnées sur chacun des pages produits du site web de TRENDnet.
TEG-424WS Certifications This device can be expected to comply with Part 15 of the FCC Rules provided it is assembled in exact accordance with the instructions provided with this kit. Operation is subject to the following conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received including interference that may cause undesired operation. Waste electrical an electronic products must not be disposed of with household waste.
