TE100-S55E+/TE100-S88E+ 5-port/8-port 10/100Mbps Auto-MDIX Fast Ethernet Mini Switch User’s Guide Le Guide de l'utilisateur du Votre Switch Fast Ethernet 10/100M à 5 ou 8 ports Benutzeranleitung des 10/100M Fast Ethernet Switch mit 5 oder 8 Anschlüssen Guía del Usuario Del conmutador Fast Ethernet de 5 puertos o 8 puertos a 10/100 m Version 08.24.04 TRENDnet TRENDware, USA What's Next in Networking Copyright ©2004. All Rights Reserved. TRENDware International, Inc.
Table of Contents English ...................................................................................................... 1. About This Guide .............................................................................. 2. Introduction ....................................................................................... 3. Packaging Contents .......................................................................... 4. Identifying External Components ................................................
English UG 1. About This Guide Congratulations on your purchase of the 5-Port or 8-Port 10/100Mbps Fast Ethernet Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible desktop package. Terms/Usage In this guide, the term “Switch” (first letter upper case) refers to the 5-Port or 8port 10/100Mbps auto-negotiation Fast Ethernet Switch, and ”switch” (first letter lower case) refers to other Ethernet switches.
2. Introduction This chapter describes the features of the Switch. Features The Switch is ideal for deployment with multiple high-speed servers for shared bandwidth 10Mbps or 100Mbps workgroups. With the highest bandwidth 200Mbps (100Mbps full-duplex mode), any port can provide workstations with a congestion-free data pipe for simultaneous access to the server. The Switch is an unmanaged 10/100 Fast Ethernet Switch that offers solutions in increasing small Ethernet/Fast Ethernet workgroup bandwidth.
3. Packaging Contents This chapter provides unpacking and setup information for the Switches. Unpacking Open the box of the Switch and carefully unpack the contents.
4. Identifying External Components Front Panel The figure below shows the front panels of the switch. TE100-S55Eplus TE100-S88Eplus PWR (Power Indicator) This indicator lights green when the hub is receiving power. It is off for no power. LINK/ACT (Link / Activity) (green) This indicator lights green when the port is connected to a Fast Ethernet or Ethernet device. The indicator blinks green when there is activity on the port.
Rear Panel TE100-S55Eplus Auto-MDIX Ports DC Power Jack TE100-S88Eplus Auto-MDIX Ports 5 DC Power Jack English
5. Connecting The Switch PC to Switch You can connect a PC to the Switch via a two-pair Category 3, 4, 5 UTP/STP cable (use Category 5 for 100Mbps connection). You can connect the PC (equipped with a RJ-45 10/100Mbps Fast Ethernet adapter) to any of the ports. When connecting PC to the Switch, the Switch's Port LED indicator will light according to the network adapter's connection speed.
Switch to switch (or other devices) You can connect switch(s) or other Ethernet device(s) (10BASE-T or 100BASE-TX) to this Switch via a two-pair Category 3, 4, 5 UTP/STP cable (use Category 5 for 100Mbps connection). The connection is accomplished from any RJ-45 port on the device to any RJ-45 port on the Switch. After connecting the hub to the Switch, the Switch's Port LED indicator will light according to the hub's connection speed.
6. Specifications General Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet Protocol CSMA/CD Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full- duplex) Topology Star Network Cables 10BASE-T: 2-pair UTP Cat. 3,4,5 (100 m), EIA/TIA- 568 100-ohm STP (100 m) 100BASE-TX: 2-pair UTP Cat.
Performance Transmission Method Store-and-forward Packet Filtering/ Forwarding Rate 10Mbps Ethernet: 14,880pps 100Mbps Fast Ethernet: 148,800pps RAM Buffer 128KBytes per device (TE100-S55Eplus) 256Kbytes per device (TE100-S88Eplus) Filtering Address Table 4K entries per device (TE100-S55Eplus) 8K entries per device (TE100-S88Eplus) MAC Address Learning Automatic update 9 English
FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user's guide, may cause harmful interference to radio communications.
TRENDnet TRENDware, USA What's Next in Networking @ Product Warranty Registration Please take a moment to register your product online. Go to TRENDware’s website at http://www.TRENDNET.com TRENDware International, Inc. 3135 Kashiwa Street Torrance, CA 90505 http://www.TRENDNET.com Copyright ©2004. All Rights Reserved. TRENDware International, Inc.