Datasheet

Hardware
Cables and Ports
Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4,
6, and 8) straight through and reverse, COAX and Alarm with includes
RJ45 to F adapters, USB 3.0, and USB 2.0 cables
PIN Tests
Identifies proper, severed, short circuit, and cross connected pins
TX/RX Troubleshooting
Displays separate TX and RX results for more efficient troubleshooting
Local and Remote Testing
A master unit facilitates loop testing and a detachable remote terminal
unit allows for cable testing in locations away from the master unit
Continuous Scan
Continuous scan mode is design to accommodate testing with cable
ends in different locations
Manual Scan
Manual scan is well suited for loop back cable testing
Quick Test Mode
Designed to quickly test large cable quantities, Quick Test Mode
identifies a given cable type and then immediately issues a Pass/Fail for
the same cable type
Blinking Hub/Switch Mode
Designed to confirm which port on a hub/switch a given cable is
networked to, Blinking Hub/Switch Mode causes the connected network
port’s LED indicator to blink
Cable Distance
Tests cables lengths of up to 300 meters (1,000 ft.)
Tone Generator
Compatible with TRENDnet’s TC-TP1, Network Probe, to trace cables
using two selectable tones
TC-NT3
Networking Solution