Datasheet

VDV & USB Cable Tester

TC-NT3 (v1.0R)

TRENDnet’s VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice,

data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters

(1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case.

• Comprehensive cable tester for network professionals

• Tests voice, data, video, and USB cables

• Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.)

• Identifies severed, short circuit, and cross connected pins

• Quick pass/fail for large test quantities

• Blinking Hub/Switch Mode identifies connected hub/switch port

• Convenient travel case

TC-NT3

PAGE 1
TC-NT3 VDV & USB Cable Tester TC-NT3 (v1.0R) • Comprehensive cable tester for network professionals • Tests voice, data, video, and USB cables • Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.
PAGE 2
TC-NT3 Hardware Cables and Ports Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6, and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0, and USB 2.
PAGE 3
TC-NT3 Specifications Test Pin Configuration • RJ45 EIA, TIA-568A/568B, and crossover cables • RJ9, RJ11, RJ12, RJ14, RJ25, RJ45, and RJ61 • USOC 2, 4, 6, and 8 • Coax Video-BNC and CATV-F • USB 3.0, USB 2.