Quick Installation Guide TK-803R TK-1603R
Table ofofContents Table Contents English ..................................................................................................... 1. Before You Start ................................................................................ 2. How to Install ..................................................................................... 3. Operation ........................................................................................... 1 1 2 4 Specifications .................................
1.
2. How to Install 1. Turn OFF all computers and their peripherals, and then disconnect all power cords. 2. Use the KVM cables to connect each computer to the KVM switch. 3. Connect the shared PS/2 or USB keyboard, monitor, and PS/2 or USB mouse to the KVM switch's Console Port. (TK-1603R shown) 4. Connect the included AC Power Adapter to the KVM switch and then to a power outlet.
. Turn ON the connected computers one-by-one and wait until each computer's desktop appears. Rack Mount The KVM Switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in a wiring closet with other equipment.
3. Operation Note: To switch between computers, you can use the front-panel push buttons or the Hot Key commands. LED Indicators Red LED light: KVM cable is connected and PC is powering the KVM switch. Green LED light: Indicates the selected PC port is active, whether the computer is turned on or off. Push Buttons Press the push buttons to switch between computers.
To select a specific PC port: For TK-803R Select PC = ScrLk + ScrLk + Y For example, to Select Port 1 on the TK-803R you hit the following key sequence: Select PC = ScrLk + ScrLk + 1 ScrLk + ScrLk + Y For TK-1603R Select PC = + Z For example, to select Port 1 on the TK-1603R you hit the following key sequence: Select PC = ScrLk + ScrLk + + 0 1 To select port 10 on the TK-1603, hit the following key sequence: Select PC = ScrLk + ScrLk + + 1 0 MAC USERS Standard PC Keyboard to MAC Ke
Quick Reference Sheet for TK-803R/TK-1603R Front-Panel Buttons Hot-Keys Command Description TK-803R ScrLk Select PC + ScrLk + Y Press the Push Button for a specific port to switch to that port TK-1603R ScrLk + ScrLk + Y + Select the active PC channel Z (YZ)= 2-digit channel number Next lower channel ScrLk + ScrLk + --- Select the next lower PC channel --- Select the next higher PC channel --- Toggle On/Off beep sound during Autoscan mode.
Specifications Management: TK-803R: 8 computers TK-1603R: 16 computers Console Port Connectors: 1 x USB keyboard Type A 1 x USB mouse Type A 1 x PS/2 keyboard 6-pin mini din female 1 x PS/2 mouse 6-pin mini din female 1 x VGA HDB 15-pin female PC Port Connectors: (all female) TK-803R: 8 x VGA HDB 15-pin TK-1603R: 16 x VGA HDB 15-pin VGA Resolution: 2048 x 1536 Port Selection: Push Button and Hot-Key Commands LED Segment: Per Port : PC Link (Green) ; PC Active (Red) Keyboard State: Saved and res
Troubleshooting Q1: Do I need to use the included external AC adapter? A1: It is recommended that you use the included external AC adapter with the TK-803R/TK-1603R KVM switch. Q2: I have the KVM switch connected properly, but my USB keyboard and mouse don't work. A2: First, make sure your USB port is working properly by testing it with your other USB devices. Second, once you confirm that the USB port is functional, please reboot your computers, and try to use the KVM switch again.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDnet'S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.
