User's Guide

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
38-2
Command Modes
Interface Configuration Mode
User Guidelines
The no form is to disable the rate limiting on a port.
Example
switch(config-if)# rate-limit ingress 64
Command History
Version
History
1.00.001
This command was introduced
show rate-limit
To display the current rate-limit setting of interfaces
Command
show rate-limit [ interface <interface-type> <interface-id>]
Syntax Description
interface
interface-type
interface-id
Specifying which interface to show rate limiting information.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Command Modes
Privileged EXEC Mode
User Guidelines
System will show the information for all ports when executing the command
without a given interface parameter.
Example
switch# show rate-limit int fa 0/1
Fa0/1
Ingress Rate Limit Control : Disabled
Egress Rate Limit Control : Enabled
Egress Rate Limit Control : 64
Command History
Version
History
1.00.001
This command was introduced