Datasheet

MTBF
• 510,304 hours
Housing
• IP30 metal case
• DIN-rail mount
• Wall mount
• Grounding point
• 6 KV ESD protection
Operating Temperature
• - 40 to 75 °C (-40 to 167 °F)
Operating Humidity
• Max. 95 % non-condensing
Dimensions
• 143 x 105 x 45 mm (5.6 x 4.1 x 1.8 in.)
Weight
• 700 g (1.6 lb)
Certifications
• CE
• FCC
• Shock (EN 60068-2-27)
• Freefall (EN 60068-2-32)
• Vibration (EN 60068-2-6)
Warranty
• Limited Lifetime Warranty*
Package Contents
• TI-PG62B
• Quick Installation Guide
• Removable terminal block
• DIN-rail and wall mount kit
TI-PG62B
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [e-mail] • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
*TRENDnet offers a limited lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a one-year
warranty.
Specifications
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3z
• IEEE 802.3x
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 4 x Gigabit PoE+ ports
• 2 x 100/1000 Mbps SFP slots
• 6-pin removable terminal block
• LED indicators
• DIP switch
• DIN-Rail mount
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10 Mbps (half duplex), 20 Mbps (full
duplex)
• Fast Ethernet: 100 Mbps (half duplex), 200 Mbps
(full duplex)
• Gigabit: 2000 Mbps (full duplex)
Performance
• Data RAM Buffer: 1024 KB
• Switching Fabric: 12 Gbps
• MAC Address Table: 1 K entries
• Jumbo Frame: 9 KB
• Forwarding rate: 8.9 Mpps (64-byte packet size)
Special Features
• Hardened components rated for extreme
temperatures
• Supports 12 / 24 / 48 power inputs
• Voltage booster boost up to 55 V DC
• Dual redundant power inputs
• Auto-Negotiation
• Auto store and forward architecture
• Automatic address learning and address aging
• ESD 6 KV support
DC Power
• Input: 12 / 24 / 48 V DC
• Output: up to 55 V DC
• Compatible power supply: TI-S12048 (sold
separately)
• Consumption: Max. 5.76 Watts (no PoE)
PoE
• PoE budget: 120 W @ 24 VDC / 48 VDC / 56 VDC
• PoE budget: 60 W @ 12 VDC
Terminal Block
• Redundant power inputs, alarm relay contact, 6 pin
• Wire range: 0.34 mm^2 to 2.5 mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded wire (AWG): 12-24/14-22
• Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
• Wire strip length: 7-8 mm
DIP Switch
• 1: OFF (port 5 SFP on, default), ON (port 5 SFP
off)
• 2: OFF (SFP 1000 M, default), ON (SFP 100 M)
Alarm Relay Contact
• Relay outputs with current carrying capacity of 1A,
24V DC
• Open circuit mode when one power source is
connected
• Short circuit mode when two power sources are
connected