User's Guide

Table Of Contents

TRENDnet User’s Guide

TEW-812DRU

• Match Port: Enter the ports or port range to be forwarded to the device. (e.g. 2000-

2038 ,2200-2210).

• Trigger Protocol: Select the protocol requested by the device. TCP or UDP.

• Trigger Port: Enter the ports or port range requested by the device. (e.g. 554-554 or

6112-6112).

Note: Please refer to the device documentation to determine which ports and

protocols are required.

• Schedule: Select the defined schedule you would like to have the rule to be applied

(see “

Create Schedule” section on page 33).

• Enabled: Selecting Enabled turns on the virtual server and selecting unchecking

disables the rule.

Gaming

Advanced > Firewall > Gaming

Gaming allows you to define multiple ports (used or required by a specific application or

game) and forward them to a single IP address (a computer or device) on your network.

Using this feature is more secure compared to using DMZ (see “

DMZ” on page 34) in

which DMZ forwards all ports instead of only specific ports used by an application. Since

most ISPs constantly change your home IP address, to be able to access the Virtual

Server port(s) from the Internet it is recommended to setup Dynamic DNS service (see

“

Identify your network over the Internet” section on page 49).

1. Log into your router management page (see “

Access your router management page”

on page 16).

2. Click on the Advanced tab.

3. Click on the Firewall section and click on Special Applications.

4. Click on Enabled under Gaming Function section.

5. Review the virtual server settings. Click Apply to save settings.

• LAN IP Address: Enter the IP address of the device to forward the port (e.g.

192.168.10.101).

• TCP Ports to Open: Enter the TCP port you would like to set.

• UDP Ports to Open: Enter the UDP port you would like to set.