User's Guide
Table Of Contents
- Table of Contents
- Product Overview
- Router Setup
- Wireless Networking and Security
- Basic
- ADvanced
- Change your router IP address
- Set up the DHCP server on your router
- Set up DHCP reservation
- Manually configure your Internet connection
- Clone a MAC address
- Add static routes to your router
- IPv6 Internet Connection Settings
- Prioritize traffic using QoS (Quality of Service)
- Advanced wireless settings
- Set your router date and time
- Create schedules
- Access Control
- Open a device on your network to the Internet
- Enable/disable Application Layer Gateways (ALG)
- Enable/disable UPnP on your router
- Using External USB Storage
- Print Share Utility Installation
- Router Maintenance & Monitoring
- Change your router login password
- Change your device name
- Change your device URL
- Identify your network on the Internet
- Allow remote access to your router management page
- Reset your router to factory defaults
- Router Default Settings
- Backup and restore your router configuration settings
- Upgrade your router firmware
- Reboot your router
- Allow/deny ping requests to your router from the Internet
- Check the router system information
- Router Management Page Structure
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-812DRU
18
• User Name: admin
• Password: (xxxxxxxx)
Note: User Name and Password are case sensitive.
Network Status
This screen appears when you login into your router. This section provides an over view
of your.
+
Internet: This icon turns green to indicate that your network has a valid
Internet connection. Amber color indicates a physical connection on the
Internet port of the router but with no valid Internet connection. Red color
indicates disconnected Internet port.
Guest Network: The section provides your router’s guest network SSID.
USB: This icon turns green when your router has a valid USB connection. Red
Amber color indicates no USB connection.
Wireless: This icon turns green to indicate when your router’s wireless
network is enabled. Red color indicates your router’s wireless network is
disabled.
Security: This section provides your router’s wireless network security
information.
Connected Devices: This section provides information of all connected
devices on your router.