TRENDnet User’s Guide Cover Page
TRENDnet User’s Guide Contents Table of Contents Troubleshooting ........................................................................... 13 Contents ..........................................................................................i Product Overview ...........................................................................1 Package Contents .......................................................................................................... 1 TEG-ECSX ...................................
TEG-ECSX / TEG-ECTX / TEG-ECSFP TRENDnet User’s Guide Package Contents Product Overview TEG-ECSX TEG-ECSX Multi-Language Quick Installation Guide CD-ROM (Drivers & User’s Guide) TEG-ECTX TEG-ECSX TEG-ECTX Multi-Language Quick Installation Guide CD-ROM (Drivers & User’s Guide) TEG-ECSFP TEG-ECSFP Multi-Language Quick Installation Guide CD-ROM (Drivers & User’s Guide) If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/dist
TEG-ECSX / TEG-ECTX / TEG-ECSFP TRENDnet User’s Guide TEG-ECSX TRENDnet’s SC-Type Fiber PCIe Adapter, model TEG-ECSX, converts a free PCI Express slot into an SC-Type Multi-Mode fiber port. Advanced features include Jumbo Frame, Layer 2 Priority tagging, VLAN tagging, and SNMP support. The included standard bracket are compatible with Windows®, Mac®, and Linux® tower computer designs. LED Indicators LED indicators convey port status Monitoring SNMP v1 protocol support Traffic Management Features 802.
TEG-ECSX / TEG-ECTX / TEG-ECSFP TRENDnet User’s Guide Product Hardware Features PCIe: Connects your adapter to an available PCIe slot on your computer. LED Indicator: The LED will turn on when connected and blink rapidly to indicate data activity. System Requirements PCIe Gigabit Port LED Indicator TEG-ECSX CD-ROM Drive (Utility and Driver Installation with included CD) PCI Express 1.1 slot Multi-mode fiber cable (TEG-ECSX) Cat. 5e or Cat.
TRENDnet User’s Guide Installing your Adapter TEG-ECSX / TEG-ECTX / TEG-ECSFP 4. Follow the InstallShield Wizard and then click Finish. This section describes how to install the software driver for your adapter. Windows® OS Installation 1. Insert the included CD-ROM into your computer’s CD-ROM drive. Note: If you do not have the included CD-ROM, you can download the utility and drivers from http://www.trendnet.com/downloads/. 5. Shutdown your computer and then open the computer’s case. 2.
TRENDnet User’s Guide TEG-ECSX / TEG-ECTX / TEG-ECSFP 7. Close your computer case 8. Power on your computer and wait until the Windows desktop appears 9. Your computer will detect the adapter and will automatically install the drivers. Connecting the TEG-ECTX to your network 1. Connect a Cat. 5e or Cat. 6 network cable from the TEG-ECTX adapter to an available Gigabit port on your Gigabit switch or router (e.g. TEW-818DRU). Note: The TX and RX cables must be reversed on the opposite fiber connection.
TRENDnet User’s Guide TEG-ECSX / TEG-ECTX / TEG-ECSFP Using the diagnostic utility The Diagnostics Utility is a Windows platform application and is only available for Windows Vista. It provides General Information, VLAN ID settings, Driver property settings, Diagnostics function, Statistics, Cable analysis, and Wake On LAN function. 1. Visit www.TRENDnet.com to save and download the diagnostic utility in the product download page. 2.
TEG-ECSX / TEG-ECTX / TEG-ECSFP TRENDnet User’s Guide 4. Once the installation is complete, the utility window will automatically appear. VLAN This page shows information about VLANs on current selected network adapter. User can add or remove VLAN here. The user can change the VLAN ID of existing VLAN. Note: If the utility does not appear, go to Programs Realtek Realtek Ethernet Diagnostic Utility to launch the Diagnostics Utility manually.
TEG-ECSX / TEG-ECTX / TEG-ECSFP TRENDnet User’s Guide Advanced Setting Send and Receive This page displays working parameters for this network adapter. The user can modify these parameters here. Two computers with adapters in the same LAN can perform send & receive experiments with broadcast packet here. Diagnostics Statistics This page performs hardware tests on the selected network adapter.
TRENDnet User’s Guide TEG-ECSX / TEG-ECTX / TEG-ECSFP Cable This page estimates the length of the network (RJ-45) cable that is connected to the network adapter. Note: This feature is not supported on the TEG-ECSFP. Wake On LAN This page provides two ways for the user to wake up a computer in standby or hibernate mode via the selected network adapter. A computer can be woken up only if related configurations in BIOS and the network adapter are enabled.
Limited Warranty TRENDnet User’s Guide Technical Specifications TEG-ECTX Standards IEEE 802.1p IEEE 802.1Q IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3z IEEE 802.3ab Device Interface 10/100/1000 Mbps Ethernet port PCI Express 1.1 Standard profile bracket LED Indicators Supported OS Windows 8.1, 8, 7, Vista, XP, Server 2003, 2000, Mac OS 10.4-10.7 (Intel-based) Linux 2.4, 2.6, 3.x Preboot Execution Environment 2.
Limited Warranty TRENDnet User’s Guide IEEE 802.3x IEEE 802.3z IEEE 802.3ab Device Interface SC-type multi-mode fiber port PCI Express 1.1 Standard profile bracket LED Indicators Supported OS Windows 8.1, 8, 7, Vista, XP, Server 2003, 2000 Mac OS 10.4-10.7 Linux 2.4, 2.6, 3.x Data Rate Gigabit: 2000 Mbps (full-duplex) Special Features Power down and link down power savings Jumbo Frames up to 9 K IEEE 802.1Q VLAN tagging IEEE 802.
Limited Warranty TRENDnet User’s Guide Supported OS Windows 8.1, 8, 7, Vista, XP, Server 2003, 2000 Mac OS 10.4-10. 7 Linux 2.4, 2.6, 3.x CE FCC Warranty 3 year limited Data Rate Gigabit: 2000 Mbps (full-duplex) Special Features Power down and link down power savings Jumbo Frames up to 9 K IEEE 802.1Q VLAN tagging IEEE 802.1p Layer 2 priority tagging Preboot Execution Environment 2.1 (PXE) PCI Message Signaled Interrupt (MSI) Alert Standard Format 2.
TRENDnet User’s Guide Troubleshooting Q: I inserted the Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do? Answer: 1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the “Search programs and files” box, and type D:\Autorun.exe, where “D” in “D:\Autorun.
Limited Warranty TRENDnet User’s Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEG-ECSX/TEG-ECTX/TEG-ECSFP – 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.