Quick Installation Guide TE100-P1U
Table ofofContents Table Contents English ...................................................................................................... 1. Before You Start ................................................................................. 2. How to Connect ................................................................................. 3. Configure the Print Server ................................................................. 4. Add the Network Printer to your PC ...............................
1. Before You Start Package Content TE100-P1U Quick Installation Guide Utility CD-ROM Power Adapter (5V, 2.5A) System Requirements CD-ROM Drive CPU: Intel Pentium 100Mhz or above Memory: 8MB or above Windows 2003/XP/2000/ME/98SE, Unixware, Linux, Mac OS X Application 10/100Mbps USB 2.
2. How to Connect Note: Please power off all printers before connecting them to the print server. 1. Connect a RJ-45 network cable from a Switch/Router to the LAN port of the Print Server. 2. Connect the USB Printer to the USB port of the Print Server. 3. Connect the AC Power Adapter to the Print Server and then to a power outlet. 4. Power ON printer.
3. Configure the Print Server Note: The Print Server can be managed using the PS-Utility or a web browser. For Mac Users, change your computers IP address to 192.168.0.X (where X is an available number from 2-254), and enter 192.168.0.1 in your web browser to access the Print Server's Web Utility. (The Print Server Utility only requires to be installed on one of the network PCs) For Windows Users 1. Insert the Utility CD-ROM into your computer's CD-ROM Drive and then click Install Utility.
4. Click Show Web Setup. 5. Write down the Server Name and Port Name. Print Server configuration is now complete.
4. Add the Network Printer to your PC Note: For TCP/IP Printing instructions, please consult the User’s Guide included on the Utility CD-ROM. Windows 2000/XP 1. Go into the Control Panel and double-click the Printers and Faxes icon. Click Add Printer and then click Next. 2. Select Network Printer and then click Next. 3. Select Connect to this printer and type in the server name and the printer name in the following format: \\server_name\printer_name Click Next.
4. Click OK. 5. Select the appropriate driver for your printer and then click OK. 6. Click Finish. 7. Repeat steps 1 to 6 to add the network printer to other computers on the network. Add Network Printer is now complete. For detailed information regarding the TE100-P1U configuration and advanced settings, please refer to the User's Guide included on the Utility CD-ROM or TRENDnet's website at www.trendnet.
Troubleshooting Q1. I correctly typed in the print server name and printer name, but I still cannot add a network printer. What should I do? A1. Double check your hardware connections; make sure that the print server and printer are powered ON and are properly connected. Also verify that the spelling of the server name and printer name are correct. Q2.
TRENDnet Technical Support US/Canada Support Center European Support Center Contact Contact Telephone: 1(866) 845-3673 Email: support@trendnet.com Visit our website for detail contact information http:// www.trendnet.com/support Tech Support Hours 24/7 Toll Free Tech Support Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com 3135 Kashiwa Street Torrance, CA 90505 USA Copyright ©2006. All Rights Reserved. TRENDnet.
