Instructions

MiraInstructionsforlegacycameras



1. Visithttp://www.trendnet.com/miraforcompatiblecameras,hardwareversions,latestfirmware,

appandsoftware.



2. PleasemakesurethecamerashavetheMiracompatiblefirmwareloaded.Firmwareinformation

canbefoundunderBasic/Systeminformationsection.





PAGE 1
Mira Instructions for legacy cameras 1. Visit http://www.trendnet.com/mira for compatible cameras, hardware versions, latest firmware, app and software. 2. Please make sure the cameras have the Mira compatible firmware loaded. Firmware information can be found under Basic / System information section.
PAGE 2
3. Open Mira app on your phone, click on the + sign and select Online Device to find the camera that you would like to add, this is for local viewing only. 4. Find the camera and tap on it from the list. Click on the Add button in the next screen, fill in the information and tap the disk icon to save.
PAGE 3
5. Camera is added to the main window, tap the screen to access the live view.
PAGE 4
Remote Access 1. Please check the Remote Service port on your camera, default is 8000. If you have more than 1 camera that requires remote access, please change additional cameras’ port here. (eg. 8001, 8002, 8003 and etc) 2. Open the set Remote service port on your router’s port forwarding section. For instructions on how to configure this, please refer to your router’s user manual.
PAGE 5
3. Then open Mira app, click on + button and selection Manual Adding to add the camera manually. 4. Enter the remote IP address, the port number, login credentials then tap the disk icon to save. Double tap the camera the screen to access live view.