User's Manual

Microsoft VPN
Windows 2000 Server Configuration
Configuration is the same as for Example 2: Windows 2000/XP Client to except for specifying the Source and Destination addresses
for the "Filter Properties". Instead, for both IP Filters, the Filter Properties- Addressing should be completed as follows.
Figure 77: Windows 2000 Server - Addressing
• The Source Address should be set to "A specific IP Subnet", and the IP address and Subnet mask set to the address range used on
the Broadband VPN Gateway's LAN.
• The Destination Address should be set to "A specific IP Subnet", and the IP address and Subnet mask set to the address range
used on the Windows 2000 LAN.
99