Manual

Installation Guide
www.trendingaccessibility.com [e-mail]
5
for linear shower pan surface mounted on concrete
Step 12 > > > > > > > >
Make your final connections to the drain. Make
sure connection is snug but do not over tighten.
Step 9 > > > > > > > >
Again while insuring that your pan has remained
level, drill and counter sink holes into the Linear pan.
Using cement anchors, attach the pan. Do not ag-
gressively screw and over tighten, as you may force
the Linear pan out of level.
If required you may drill and countersink
anywhere on the surface of the Linear
Shower Pan, not only the pre-marked
locations.
Step 11 > > > > > > > >
Check that the Fusion Pan is level on all four sides.
Fill in any gaps around the perimeter of the pan over
1/8” with latex or acrylic caulk.
Do not use 100% silicone.
Step 10 > > > > > > > >
Using a screed bed, bring the rest of the floor up to
the level of the Fusion pan.