User Guide User Manual
Table Of Contents
- 1 About This Manual
- 2 About IQ3
- 3 IQ3 Pages
- 4 Using IQ3 From a Web Browser
- 4.1 Basic Use
- 4.2 Add a User
- 4.3 View Occupation Times
- 4.4 Adjust Values
- 4.5 Display a Graph
- 4.6 Display 10 Modules From a Specified Module
- 4.7 Display Other Modules
- 4.8 View Graphical Display Pages
- 4.9 View the Alarm Log
- 4.10 View Module List Pages
- 4.11 View Module Detail Pages
- 4.12 Goto the Associated Module
- Index
20 IQ3 Web User Guide TC200631 Issue 2, 02/02/2009
Using IQ3 From a Web Browser
4.2 Add a User (continued)
In the 6. Password box enter the password associated with the user name. This must be entered by the user when
logging in from a web browser.
In the 7. Re-type Password box re-enter the password associated with the user name. This must be entered by
the user when logging in from a web browser.
Click 8. Create New. The new user will be added.
Edit the new user module to set up the necessary parameters as described in the ‘9. Adjust Module Parameters’
section of this manual.