Information

Instant results using
the FiberMASTER
Power Meter (PM)
and Light Source (LS)
The power meter / light source is used to measure
attenuation in multimode or single-mode cabling.
The power meter’s high dynamic range also allows
troubleshooting of LAN and Telecom networks. Both
the power meter and light source support the bre
inspection probe to capture images of the connector
on each end of the cabling.
All OTDRs include a power meter and when
partnered with a FiberMASTER light source, the
OTDR can be used to directly measure cable
attenuation or to measure the output power of
optical equipment for troubleshooting.
Fibre Inspection Probe with Automatic Certication
to IEC61300-3-35 Standard
90% of all bre optic cable and network issues arise
from dirty and/or damaged bre connectors which
is why the Fibre Inspection Probe is an essential
piece of equipment for any bre cable installer
or technician.
5
Depend On Us
Key Features
• ORL measurement range to -60 dB
• 82 dB power meter dynamic range
• Compatible with the auto-centring/Pass/Fail
video probe
• Auto test up to three wavelengths
• Auto wavelength switching
• Universal power meter and light source adapters
• Storage up to 40,000 tests
• Bright colour display
• Rechargeable lithium battery
• USB interface
• CertSoft free reporting software
• On-board help feature
• Pass/Fail to IEC61300-3-35 Standard
• 150x and 300x zoom level
• Automatic image positioning
• Stores images in FiberMASTER testers
• Attach images to OTDR / Power Meter test report
• Wide range of connector adapters available
• One hand operation