Information

Multimedia Support
RJ-45, RJ-11/RJ-12 and coax
ports for verification of low
voltage copper cables
Voltage Protection
Cable testing disabled if
>2V detected
TDR Length
Testing and
Troubleshooting
Pinpoints cable faults
eliminating unnecessary
guesswork
Tone Generator
Ability to identify and trace
cables with a compatible
inductive tone probe
(optional)
PoE Detection
Identify the IEEE standard,
Class, Type, max Power (W)
and Voltage (V) available
Storage and
Protection of
Remote Unit
Reduces the chance of losing
or damaging the remote unit.
Additional numbered
remotes available
Large Backlit
Screen
Instantaneous, easy to read
test results
Media Service
Detection
Identifies analog (PBX)
and digital (ISDN)
telephone services
Ethernet Detection
Displays network rate and
duplex information
The PoE Pro includes all the features of the VDV II Pro plus the advanced PoE features.
VDVII Pro
Cable Verification
• Supports RJ45, RJ11/12 and Coax
connections
• Wiremap for miswires, split pairs,
shorts and opens
• Shielded cable testing
• Cable length
• Distance to Open / Short (TDR)
Cable Tracing
• Analog and digital tone generator
• Compatible with common cable tracing
probes
Active Network Testing
• Port Blink
• Media Service Detection – Ethernet,
analogue / digital telephone service
and ISDN
• Ethernet Speed Detection
10/100/1000 Mb/s
Other Features
• Instantaneous results – results are
shown as soon as you plug in the cable
• Larger 2.9” display
• Backlight
• Over-voltage protection
PoE Pro
All VDV II Pro features plus the following
PoE Testing:
• Validate PoE to ensure your device &
network performs successfully
• Supports 802.3bt High Power PoE
(up to 90 watts)
• Compatible with most non-standard
PoE injectors
• Identifies PSE Type (af/at/bt)
• Identifies PSE Class – 0 to 8
• Determines maximum power available
(watts) at the device location
• Displays voltage
• Displays how many pairs have PoE
Proof of Performance
Extended
Power Test
Some switches / injectors may
provide power exceeding its
IEEE Class rating. Hold button
for 3 seconds to measure
maximum available power
up to 90 watts