Manual
Table Of Contents
- Safety precautions
- Notes on use of these operating instructions
- CHAPTER 1 Your LanXPLORER
- AA Alkaline
- 4 hours under normal operating conditions
- Charging time:
- Operating temperature (min./max.):
- Storage temperature (min./max.):
- Relative humidity:
- 1.3. Equipment included Basic version
- 2.1. LanXPLORER
- 2.2. Power options
- 3.1. Principles
- 3.2. System
- 3.3. RJ45
- 3.4. Fibre-optic cable
- 3.5. Tests
- 3.6. IP
- 3.7. VLAN
- 3.8. WiFi
- 3.9. 802.1x
- 5.1. Ports
- 5.2. Passive wiring
- 5.3. Active wiring
- 5.4. Inline Test
- 5.5. Fibre-optic cable
- 5.6. WiFi
- 6.1. Test summary
- 6.2. Autotest
- 6.3. Wiremap test
- 6.4. Testing a passive route without remote / active Remote
- 6.5. Netmap
- 6.6. Verify
- 6.7. Ping
- 6.8. Voice over IP (VoIP)
- 6.9. Trace Route
- 6.10. Blink
- 6.11. Power over Ethernet (PoE)
- 6.12. Loop
- 6.13. PC Diagnosis
- 6.14. Statistics
- 6.15. WiFi
- 7.1. Safety precautions
- 7.2. Instructions for cleaning SFP modules and patch cables
- CHAPTER 2 Instrument description
- CHAPTER 3 Settings
- CHAPTER 4 Test summary
- CHAPTER 5 Test setup
- CHAPTER 6 Test description and procedure
- CHAPTER 7 Wiring test on fibre-optic conductors and SFP modules
- CHAPTER 8 LanXPLORER Firmware Update
- CHAPTER 9 Spare parts - Socket inserts
4
Disclaimer
TREND NETWORKS assumes no liability for death, injury, or damage to equipment or
property resulting from improper use of the rechargeable batteries.
TREND NETWORKS assumes no liability for subsequent damage resulting from
modifications to the rechargeable batteries or the charger or use of the same.
All rights to technical modification reserved.
Environmental Protection
Please contact a representative of TREND NETWORKS if you have any questions regarding
safe handling and disposal of the rechargeable batteries used in the LanXPLORER. Contact
information is given in the Chapter Customer Service.
Working with the LanXPLORER
The factory settings on the LanXPLORER are based on general standards, recommended
industrial standards for cable and network links, state-of-the-art technical information from
the international committees for LAN cable standards, the LAN industry as well as values
gained from tests and experience of TREND NETWORKS
Before performing any measurements TREND NETWORKS recommends clarifying with the
principal or project manager, precisely which measurements are to be performed to ensure
that all relevant parameters are maintained.
Notes on use of these operating instructions
The following symbols used in these operating instructions indicate that the user should
proceed with particular care to prevent injuries to humans, damage to the LanXPLORER or
to the system to be tested.
ATTENTION!
This symbol indicates potential lethal voltages. This poses a hazard for the life
and/or health of the person performing the action or any other humans in the
vicinity.
CAUTION!
This symbol indicates that the action in question may pose a hazard for the
environment or damage technical equipment.
NOTE:
General notes, additional information or assistance are given here.
Typographic conventions
Bold face
Indicates a key on the LanXPLORER.
Italics
Indicates a menu option in these operating instructions.
Quotation marks " "
Indicate a "Screen message"
Asterix *
Indicates a module-related option
xxx
Indicates a softkey