Manual
Table Of Contents
- Safety precautions
- Notes on use of these operating instructions
- CHAPTER 1 Your LanXPLORER
- AA Alkaline
- 4 hours under normal operating conditions
- Charging time:
- Operating temperature (min./max.):
- Storage temperature (min./max.):
- Relative humidity:
- 1.3. Equipment included Basic version
- 2.1. LanXPLORER
- 2.2. Power options
- 3.1. Principles
- 3.2. System
- 3.3. RJ45
- 3.4. Fibre-optic cable
- 3.5. Tests
- 3.6. IP
- 3.7. VLAN
- 3.8. WiFi
- 3.9. 802.1x
- 5.1. Ports
- 5.2. Passive wiring
- 5.3. Active wiring
- 5.4. Inline Test
- 5.5. Fibre-optic cable
- 5.6. WiFi
- 6.1. Test summary
- 6.2. Autotest
- 6.3. Wiremap test
- 6.4. Testing a passive route without remote / active Remote
- 6.5. Netmap
- 6.6. Verify
- 6.7. Ping
- 6.8. Voice over IP (VoIP)
- 6.9. Trace Route
- 6.10. Blink
- 6.11. Power over Ethernet (PoE)
- 6.12. Loop
- 6.13. PC Diagnosis
- 6.14. Statistics
- 6.15. WiFi
- 7.1. Safety precautions
- 7.2. Instructions for cleaning SFP modules and patch cables
- CHAPTER 2 Instrument description
- CHAPTER 3 Settings
- CHAPTER 4 Test summary
- CHAPTER 5 Test setup
- CHAPTER 6 Test description and procedure
- CHAPTER 7 Wiring test on fibre-optic conductors and SFP modules
- CHAPTER 8 LanXPLORER Firmware Update
- CHAPTER 9 Spare parts - Socket inserts
Chapter 3
Settings
29
3.6. IP
This menu allows settings to be made for logging onto a network.
1. Select Setup.
2. Select the menu point "IP".
Option
Description
IP Address
Dynamic: Automatic recognition of the
network properties.
Static: With this option it is necessary
to set the network properties
manually.
IP Address
3
Display of IP address.
NetMask
3
Display of network mask.
Gateway
3
Gateway setting.
DNS1
3
DNS1 setting.
DNS2
3
DNS2 setting.
NOTE:
When working with the Static option, request the required information on the IP address, NetMask
Gateway and DNS server from your system administrator.
3. Select the option IP Address to set Dynamic or Static.
4. Select the desired option
3
.
5. Enter the desired information with the alphanumeric keys
3
.
6. Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
3
This setting is possible only when IP Address is set to Static.
Figure 29: IP