Manual

Chapter 3
Settings
28
3.5.4. Targets
This menu point allows target addresses to be entered and managed for use in the
individual tests.
1. Select the menu point "Targets".
Softkey
Description
Add Enter a new target address.
Delete Delete a target address.
Edit Change a target address.
Adding a target address
2. Select Add.
3. Enter the target address with the alphanumeric keys.
4. Save the entry made with OK. You can exit the menu without saving the
changes with Cancel or Escape.
5. Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
Deleting a target address
1. Mark the target address to be deleted.
2. Select Delete.
Changing a target address
3. Mark the target address to be changed.
4. Select edit.
5. Enter the new parameter with the alphanumeric keys.
6. Save the entry made with Apply. You can exit the menu without saving the
changes with
Escape.
Figure 28: Targets