Operation Manual

Trend Micro™ ServerProtect™ Getting Started Guide

2-24

• Right-click the domain that you selected in the previous step and click Install

New SPNT(s) or Install New SPNW(s) (either by IPX or IP) from the pop-up

The Select a Source Server window opens.

3. Select an existing Normal Server from the list box, and then click OK. A

confirmation window appears.

4. Click OK. The Add Server(s) to Domain window opens.

5. Do one of the following to add a server to the domain:

• Select the server name in the left-hand list box

• Type the server name in Server name

6. Click Add to enter the server name into the right-hand list box.

7. Repeat step 5 until the right-hand list box displays all the servers that you want to

add into the new domain. If you want to remove a server that you have previously

added, highlight the name in the right-hand list box and click Remove. Click

Remove All to clear the right-hand list box.

8. Click OK to save your changes or click Cancel to close the window without

adding a server.

Note: Adding and installing a Normal Server are two different operations. In the former, you

are merely transferring an existing Normal Server from one Information Server to

another. In the latter, you are registering a new Normal Server by remotely installing

the software.

Deploying ServerProtect through Microsoft SMS

You can install Trend Micro ServerProtect through Microsoft Systems Management

Server (SMS) 1.2/2.0 on a Windows Server 2003/2000/NT or above platform.

Note: You must install Microsoft Systems Management Server (SMS) software to your

Windows Server 2003/2000/NT server in order to deploy client software in this

manner. In order to successfully deploy ServerProtect from SMS software distribution

sites, make sure the MSVCRT20.DLL file resides in the Windows system directory.