Operation Manual

Trend Micro™ ServerProtect™ Getting Started Guide
2-8
3. Install the Management Console on the Information Server computer. See
Installing the Management Console on page 2-13. You can install additional
Management Consoles on any Windows Server 2003/XP/2000/NT 4.0/Me/98/95
computer connected to your network.
Note: Only one Management Console can manage an Information Server at a time.
4. Install the Normal Server on a NetWare server on the network. See Installing a
Normal Server from the setup program on page 2-19.
5. Update the ServerProtect pattern, scan engine, and program files. See
Configuring Updates on page 3-15.
6. Create additional ServerProtect domains to manage your Normal Servers. See
Creating ServerProtect Domains on page 3-8.
7. Install the remaining Normal Servers (Windows Server 2003/2000/NT and
NetWare) using the Management Console. See Installing a Normal Server from
the Management Console on page 2-23.
Steps 1, 2 and 3 can be executed together during initial Setup. The NetWare Normal
Server installation should be performed after the Information Server installation has
been completed.
Managing ServerProtect Across a Wide Area Network
ServerProtect can be managed from multiple locations across a WAN, however to
ensure proper network performance Trend Micro suggests installing Information
Servers in the same physical segment of the network as the Normal Servers they
manage.
For example, if you want to manage ServerProtect Normal Servers in Japan from a
Management Console in Germany, we recommend the Information Server(s)
managing the Normal Servers is also in Japan.
Note: To ensure proper network performance install ServerProtect Information Servers in the
same physical segment of the WAN as the Normal Servers they manage.