Operation Manual

Trend Micro™ ServerProtect™ Getting Started Guide
2-6
5. Create additional ServerProtect domains to manage your Normal Servers. See
Creating ServerProtect Domains on page 3-8.
6. Install the remaining Windows Server 2003/2000/NT Normal Servers using the
Management Console. See Installing a Normal Server from the Management
Console on page 2-23.
Steps 1, 2 and 3 can be executed simultaneously during initial Setup.
A NetWare Environment
If you are installing ServerProtect to a NetWare environment, you must have one
Windows Server 2003/2000/NT server/workstation to install an Information Server
and the Management Console.
Note: Normal Servers need to detect the Information Server that will manage them. So you
begin your setup by installing the Information Server on a Windows-based server.
To deploy ServerProtect in a NetWare environment:
1. Install the Information Server. See Installing an Information Server on page 2-15.
2. Install the Normal Server on the Information Server computer. See Installing a
Normal Server from the setup program on page 2-19.
3. Install the Management Console on the Information Server computer. See
Installing the Management Console on page 2-13.
4. Install the Normal Server on a NetWare server on the network. See Installing a
Normal Server from the setup program on page 2-19.
5. Update ServerProtect pattern, scan engine, and program files. See Configuring
Updates on page 3-15.
6. Create additional ServerProtect domains to manage your Normal Servers. See
Creating ServerProtect Domains on page 3-8.
7. Install the remaining NetWare Normal Servers using the Management Console.
See Installing a Normal Server from the Management Console on page 2-23.