Operation Manual

Managing ServerProtect
3-55
6. Under Compressed file scanning, select the Scan compressed files check box.
Move the Scan level slider to set the number of compressed layers that you want
to scan. For information on advanced settings, refer to the Compressed file scan
topic in the online help. Advanced settings can’t be configured for NetWare
Normal Servers.
Note: If you chose to scan selected file types in step 4, make sure you included the
extensions of compressed files in the extension list.
7. Under Scan priority, click Low, Middle, or High. A high scan priority
consumes more CPU resources, but can complete scan jobs faster.
8. Click Set Action to configure how ServerProtect acts on infected files. See
Defining Actions Against Viruses on page 3-45.
Note: If your selected domain contains a NetWare server, or your selected server is a
NetWare server, under NetWare Settings, click NetWare Options to configure
MAC File Scanning Settings.
9. Click Apply to save your changes or click Save As Profile to recall your
configuration settings at a later time.
Running the Scan Now Tool on Windows Normal Servers
Use the Scan Now tool to scan Windows Server 2003/2000/NT servers without
accessing the Management Console. Scan Now performs the scan according to the
Scan Now configurations you have set in the Management Console (for example,
Scan target, Scan file type).
To run the Scan Now tool:
1. Click Start > Programs > Accessories > Windows Explorer on the Normal
Server. The Windows Explorer windows appears.
2. Click the folder where you installed ServerProtect. The default location is:
C:\Program Files\Trend\SProtect
3. Double-click ScanNow.EXE. a Scan Now is performed.