Specification

Version: 1.1
Revision Date: 01/16/2020
000000023903
4/24
Suitable (and unsuitable) extinguishing media
Suitable extinguishing
media:
Use fire-extinguishing media appropriate for surrounding materials.
Unsuitable extinguishing
media:
Do not use water jet as an extinguisher, as this will spread the fire.
Specific hazards arising from
the chemical:
During fire, gases hazardous to health may be formed.
Special protective equipment and precautions for firefighters
Special fire fighting
procedures:
No data available.
Special protective equipment
for fire-fighters:
Self-contained breathing apparatus and full protective clothing must be
worn in case of fire.
6. Accidental release measures
Personal precautions,
protective equipment and
emergency procedures:
Ventilate closed spaces before entering them. Evacuate area. See Section
8 of the SDS for Personal Protective Equipment. Keep upwind. Keep
unauthorized personnel away. Do not touch damaged containers or spilled
material unless wearing appropriate protective clothing.
Accidental release measures:
In the event of a spill or accidental release, notify relevant authorities in
accordance with all applicable regulations.
Methods and material for
containment and cleaning
up:
Collect spillage in containers, seal securely and deliver for disposal
according to local regulations.
Environmental Precautions:
Avoid release to the environment. Prevent further leakage or spillage if safe
to do so.
7. Handling and storage
Handling
Technical measures (e.g. Local
and general ventilation):
Mechanical ventilation or local exhaust ventilation may be required.
Observe good industrial hygiene practices. Observe occupational exposure
limits and minimize the risk of inhalation of dust.
Safe handling advice:
Do not handle until all safety precautions have been read and understood.
Obtain special instructions before use. Use personal protective equipment
as required. Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact
with eyes, skin, and clothing. Wash hands thoroughly after
handling.Ventilate well, avoid breathing vapors. Use approved respirator if
air contamination is above accepted level. Use mechanical ventilation in
case of handling which causes formation of dust.
Contact avoidance measures:
No data available.