MSDS

Material Safety Data Sheet
VULKEM 116 DARK BRONZE
Version 1
.3 Print Date 04/21/2010
REVISION DATE: 10/24/2007
2/7 426721 323
SECTION 3 - PRODUCT COMPOSITION
Chemical Name
CAS
-
No.
Weight
%
Aromatic Polyisocyanate Resin NJ TSRN# 51721300-5270P 30.0 - 60.0
Diisodecyl phthalate 26761-40-0 15.0 - 40.0
Calcium Carbonate (Limestone) 1317-65-3 15.0 - 40.0
Tackifier NJ TSRN# 51721300-5272P 5.0 - 10.0
Thickener NJ TSRN# 51721300-5300P
3.0 - 7.0
Petroleum distillates 64742-47-8
1.0 - 5.0
Carbon Black 1333-86-4 - <1.0
Butyl benzyl phthalate 85-68-7 - <1.0
Crystalline Silica (Quartz)/ Silica Sand 14808-60-7
- <1.0
Toluene-2,6-Diisocyanate 91-08-7 - <0.1
2,4-Toluene diisocyanate 584-84-9 - <0.1
o-Cresol 95-48-7
- <0.1
SECTION 4 - FIRST AID MEASURES
Get immediate medical attention for any significant overexposure.
Inhalation : Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get
medical attention.Move to fresh air. If required, artificial respiration or administration
of oxygen can be performed by trained personnel.
Eye contact : Flush with water for at least 15 minutes while holding eye lids apart. Get medical
attention immediately.
Skin contact : Clean area of contact thoroughly using soap and water. If irritation, rash or other
disorders develop, get medical attention immediately.
Ingestion : Do not induce vomiting unless advised by a physician. Call nearest Poison Control
Center or Physician immediately.
SECTION 5 - FIRE FIGHTING MEASURES
Flash point : 150 °F, 66 °C
Method
: Tag Closed Cup
Lower explosion limit : 0.60 %(V) Solvent
Upper explosion limit : 7 %(V) Solvent
Autoignition temperature : Not available.
Extinguishing media : If water fog is ineffective, use carbon dioxide, dry chemical or foam.
Hazardous combustion
products
: Carbon monoxide and carbon dioxide can form.Hydrocyanic acid and
nitrogen oxides can form.
Protective equipment for
firefighters
: Use accepted fire fighting techniques. Wear full firefighting protective
clothing, including self-contained breathing apparatus (SCBA).
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Use appropriate protective equipment. Avoid contact with material. Scrape up and transfer to appropriate