Use and Care Manual

TremPro Polyester Reinforcing Fabric
COVERAGE RATES
LIMITATIONS
PHYSICAL PROPERTIES
MAINTENANCE
PRECAUTIONS
TECHNICAL SUPPORT
Tremco is a US Registered trademark of Tremco Incorporated.
The information provided on this data page supersedes all previous data concerning this product and its application.
The Statements provided concerning the materials shown are intended solely as a general guide for material usage and are believed to be
true and accurate. Since the manner of use is beyond our control, Tremco DOES NOT MAKE NOR DOES IT AUTHORIZE ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR ANY PURPOSE, OR ANY OTHER WARRANTY, GUARANTEE OR REPRESENTATION, EXPRESSED OR IMPLIED,
CONCERNING THIS MATERIAL EXCEPT THAT IT CONFORMS TO TREMCO’S PRODUCT SAMPLE. Buyer and user accept the product under those
conditions and assume the risk of any failure, injury of person or property and loss or liability resulting from the handling, storage or use of the
product, whether or not it is handled, stored, used in accordance with directions or specifications. UNDER NO CIRCUMSTANCE SHALL TREMCO BE
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM ANY BREACH OF WARRANTY. IN ALL CASES, TREMCO’S LIABILITY IS
LIMITED, AT TREMCO’S OPTION, TO THE REPLACEMENT OF GOODS, OR THEIR VALUE, PROVEN TO BE DEFECTIVE IN MANUFACTURING.
0921
www.tremcoroofing.com
3735 Green Road
Beachwood, Ohio 44122
1.800.852.6013
50 Beth Nealson Drive
Toronto, Ontario M4H 1M6
1.800.668.9879
Tremco Roofing & Building
Maintenance is a part of Tremco
Construction Products Group
Your local Tremco Roofing sales representative can provide you with effective maintenance
procedures which may vary, depending upon specific conditions. Periodic inspections,
early repairs and preventative maintenance are all part of a sound roof program.
Users must read container labels and Safety Data Sheets for health and safety precautions
prior to use.
Your local Tremco Roofing sales representative, working with the Technical Service
Staff, can help analyze conditions and needs to develop recommendations for special
applications.
PROPERTY TYPICAL VALUE TEST METHOD
Ball Burst 109 lbs. (49.4 kg) ASTM D3787
Elongation 61.65%* ASTM D1682
Elongation @ Max Load MD - 25%, XMD - 79% ASTM D5034
Mildew & Rot Resistance Excellent
Mullen Burst 1 76.8 lbs. (80.2 kg)* ASTM D3786
Tear Strength (Trapezoid) 16.1 lbs (7.3 kg)* ASTM D1117
Tear Strength (Trapezoid) MD - 22 lbs (9.9 kg), XMD - 21 lbs (9.5 kg) ASTM D5587
Tensile Strength 51.1 lbs (23.2 kg)* ASTM D1682
Tensile Strength (1” Jaws) MD - 67 lbs (30.3 kg), XMD - 59 lbs (26.7 kg) ASTM D5034
Tensile Strength (2” Jaws) MD - 124 lbs (56.2 kg), XMD - 77 lbs (34.9 kg) ASTM D5034
Thickness 0.018 in ASTM D1777
Weight per Sq. Yd. (m2) 3 oz. (0.1 kg)
Weight per 6’ x 50’ Roll 0.55 oz. (0.016 kg)
*Average of machine & cross machine direction values
6” x 50’ - Approx. 50 sq. ft. (4.6 m²)
NOTE: Coverage rates do not account for overlapped areas.
Refer to the respective liquid-applied product data sheet for specific application
information.