Operation Manual

68
Reverse bearing
Only for GC 400
3.10 Compass
Keep pressing the “PILOT”
key until the compass mode
appears on the display. The
wide pointer on the edge
points north. By pressing
the “CHRONO” key you
can change to the opposite
bearing (reverse bearing).
IMPORTANT: To avoid imprecise measuring
results you should not use your watch’s
compass function
near magnetic objects, e.g. mobile phones,
loudspeakers and motors
near metallic objects
near electrical equipment
in reinforced concrete buildings
in a moving object.
“Symbol arrow downwards”
then appears in the display.
TRE_GA_GC350-400.indd 68 22.12.2006 11:59:11 Uhr