Operation Manual

1.5 Eingabe der persönlichen Daten
50
Setting Alarm 1 and Alarm 2
Press the “MODE” key for
about 2 seconds. The fl ashing
“SET” symbol appears. With
the “MODE” key you now select
minutes and hours. When the
selected numerals fl ash, set
the desired alarm time with the
“CHRONO” and “LAP/RESET”
keys.
Entering minutes and confi r-
ming with “MODE” key
Hourly signal
By pressing the “CHRONO” key
in “Daily alarm” mode you reach
the setting “CHIME” (hourly sig-
nal). With the “LAP/RESET” key
you can switch the signal (watch
beeps hourly) on or off.
If the function is on, the symbol
“ ” is displayed.
TRE_GA_GC350-400.indd 50 22.12.2006 11:59:03 Uhr