Operation Manual

5.4 Setting(s) of wheel size(s)
(FC 830, 840, 845 )
You can use your cycle computer
on 2 cycles – even if the wheels are
different sizes. To do this, you need a
separate holder and sensor for each
cycle. For FC 830/840, you need Art.
ZF 406 Uni-Base, ZF 435 transmitter,
ZF 50 magnet. For FC 845 you will
need Art. ZF 410 Night-LightBase +
magnet, ZF 435 transmitter. Press the
SET button to make or change the
settings for cycle 1 or cycle 2 in the
“Settings for cycle” window. Use the
MODE button to select “Cycle 1” or
“Cycle 2”, then press the SET button
to confi rm.
52