User's Guide

7 | TW-1760 Wi-Fi Adapter User Guide
TrellisWare Proprietary Information
Use or disclosure of data contained on this sheet is subject to the restriction on the title page of this document.
2. Enter 10.1.0.2 OR sn-xxxx.local (where ‘xxxx’ is the radio serial number) OR the IP
address of the radio in the web browser address bar on the PC.
3. Access the TrellisWare Network Controller (TNC) web applications page. Click the
Devices tab in the left panel and select the Remote Control icon.
4. On the right side of the page, a configuration menu should populate. Scroll down and
select the Wi-Fi drop-down, enter your desired SSID, password, Channel, Broadcast
setting, and click Save.
5. The radio will save the changes made in the
window. If you changed the password, you may have to re-join the network using the
new Wi-Fi password you configured.
Step 3 (OPTIONAL): Configure Wi-Fi settings on TMT (TrellisWare Management Tool)
1. Using either the Wi-Fi adapter or an Ethernet adapter (such as the TrellisWare TW-
1710), establish a network connection between the radio and PC.
2. Launch the TrellisWare Management Tool desktop application.
3. On the left panel, select Device Config.
4. Your radio should populate in the device list if successfully connected. Check the empty
box to ensure you are configuring the preferred device.
5. On the right side of the screen, select the Network drop-down menu and scroll down to
Wi-Fi Configuration settings.
6. You can make changes to the SSID, Passphrase, select a Wi-Fi channel, and switch
Broadcast SSID on/off.
7. After making the desired changes, click the blue Apply button in the bottom right corner.
The radio stores the Wi-Fi configuration information and automatically reboots.