User's Guide

6 | TW-1760 Wi-Fi Adapter User Guide
TrellisWare Proprietary Information
Use or disclosure of data contained on this sheet is subject to the restriction on the title page of this document.
Wi-Fi Network Configuration
Before getting started, you must complete the pre-configuration steps for loading certificates
and setting up your workstation. Please refer to TN-0040 – Computer Pre-Configuration for
details.
Step 1: Attach the Wi-Fi adapter to the radio
1. Attach the Wi-Fi adapter to the multi-functional side
connector on the radio. The alignment pin is positioned
towards the top of the radio.
2. Use the thumbscrew to secure the dongle to the radio.
3. Turn the radio on (it automatically recognizes the
attached adapter).
4. Once the radio has completed initialization, the Wi-Fi
adapter will be operational.
Step 2: Connect to the Wi-Fi Access Point
1. From the PC wireless network connection screen, locate the radio Access Point,
identified as the radio serial number.
2. When prompted for a password, enter the default: trellisware.
3. The PC will complete the connection to the Access Point.
Step 3: Open the TrellisWare Network Controller web application to configure the radio
1. Identify the radio being used:
a. By serial number - located on the back or
side of the radio
b. (TW-950/TW-135 radios ONLY) By IP
address - displayed in the Networking
Status display on the front panel