User manual
Table Of Contents
- 1) About the SurfTab xiron 10.1 pure
- 2) Safety information
- 3) Technical specifications
- 4) Package contents
- 5) Controls and connections
- 6) Charging the SurfTab
- 7) Switching on the SurfTab
- 8) Elements on the home screen
- 9) Using the touch screen
- 10) Personalising the home screen
- 11) Setting up a screen lock
- 12) Connecting to the Internet via WiFi
- 13) Setting up/removing an email account
- 14) Installing/uninstalling apps
- 15) Using the camera
- 16) Connecting other devices
- 17) Activating standby mode
- 18) Reset and recovery mode
- 19) Switching off the SurfTab
- 20) Notes on copyright and trademarks
- 21) Notes on disposal
- 22) Notes on liability and warranty
EN
23
Connecting another device via Bluetooth®
a) Select "SET TINGS" in the applications menu. You will find the "BLUETOOTH"
item in the menu column. Tap "BLUETOOTH" with your fingertip.
b) Slide the on/off switch for Bluetooth to the right.
c) Activate the Bluetooth function on the device you want to connect and
make the device visible to other Bluetooth devices, if necessary. To do so,
refer to the instructions in the operating manual of the device.
d) A list of all available Bluetooth devices in the vicinity will appear.
e) Tap the device you want to connect. Then confirm by tapping "
PAIR".
f) You may also have to confirm pairing on the device you want to connect.
Connecting to a television via Miracast™
Miracast technology is a peer-to-peer standard for image transfer. The SurfTab
supports this standard and enables wireless transfer of image and sound from
the SurfTab to a WiFi and Miracast-enabled television device.
The SurfTab can connect to your television via Miracast only if the television also
supports Miracast technology. Please check with your television manufacturer
if necessary.
Proceed as follows to connect your SurfTab to a Miracast-enabled television:
a) First, take all of the necessary steps to prepare your Miracast-enabled
television for the Miracast transfer (consult your television’s operating
instructions for details).
b) Select "
SETTINGS" in the applications menu on the SurfTab.
c) Activate the WiFi function on the SurfTab. To do so, select "
WI-FI" and drag
the on/off switch for WiFi to the right.
d) Further down in the menu column you will find the "
DISPLAY" menu item.
Tap "
DISPLAY".
e) Tap "
CAST SCREEN".
f) At the top right of the display you will find 3 vertically stacked dots. Tap here.
g) Tap "
ENABLE WIRELESS DISPLAY" in this window.
h) A list of all available Miracast devices will appear. Tap the device that you
wish to connect to.
i) A short time later, the selected device will show the display of the SurfTab.