User manual
Table Of Contents
- 1) About the SurfTab xiron 10.1 pure
- 2) Safety information
- 3) Technical specifications
- 4) Package contents
- 5) Controls and connections
- 6) Charging the SurfTab
- 7) Switching on the SurfTab
- 8) Elements on the home screen
- 9) Using the touch screen
- 10) Personalising the home screen
- 11) Setting up a screen lock
- 12) Connecting to the Internet via WiFi
- 13) Setting up/removing an email account
- 14) Installing/uninstalling apps
- 15) Using the camera
- 16) Connecting other devices
- 17) Activating standby mode
- 18) Reset and recovery mode
- 19) Switching off the SurfTab
- 20) Notes on copyright and trademarks
- 21) Notes on disposal
- 22) Notes on liability and warranty
EN
11
5) Controls and connections
A) Front camera
B) Touch screen
C) Reset
D) Microphone
E) Volume -
F) Memory card slot
G) Volume +
H) Micro-USB socket / Charging socket
I) Audio out socket
J) On/off switch
K) Rear camera
L) Speaker
6) Charging the SurfTab
Please fully charge your SurfTab before you use it for the first time. Connect your
SurfTab to a plug socket using the USB cable and power adapter. The SurfTab
is fully charged when the two-colour status LED turns yellow. Charging via a PC
generally take longer than charging via a plug socket.
The maximum battery life is reached after approximately ten charging cycles.
The battery should be recharged to between 40 and 60 per cent every 6 months
or so if the device is not being used.
It is better for Li-ion batteries if you ‘shallow’ charge them, as this increases their
lifespan. You should generally avoid discharging the battery below 40 per cent
of its capacity, as ‘deep’ charges can result in greater loss of capacity by causing
irreversible reactions in the electrodes.
7) Switching on the SurfTab
After you have charged your SurfTab, you can switch it on. Press the on/off
switch for three to five seconds to start the device. As soon as the device is
switched on, the lock screen appears. Place your finger on the lock symbol on
the screen and drag the lock symbol to the top. Your SurfTab will now display the
home screen.