EN SurfTab® xiron 10.
Contents 1) About the SurfTab xiron 10.
13) Setting up/removing an email account ……………………………… 18 Setting up an email account ……………………………………………… 18 Removing an email account ……………………………………………… 19 14) Installing/uninstalling apps …………………………………………… 19 Downloading and installing apps ………………………………………… 19 Uninstalling apps ………………………………………………………… 20 15) Using the camera ……………………………………………………… 20 Taking a photo …………………………………………………………… 20 Recording a video ………………………………………………………… 21 Zooming ………………………………………………………………… 22 16) Connecting other devices ………………………
We hope you enjoy your TrekStor SurfTab xiron 10.1 pure. Please read the following passages carefully to familiarise yourself with the functions of this product and how to operate it. IMPORTANT! Follow the safety information in Section 2. IMPORTANT! These operating instructions are part of the product and contain important information in regard to safety, use and disposal of the tablet. Please keep these instructions in a safe place for future reference.
2) Safety information These instructions use the following warning symbols and key words: DANGER Indicates possible danger to life and/or danger of severe, irreversible injuries. CAUTION Follow instructions to avoid injuries and material damage. WARNING Follow instructions to avoid material damage. NOTE Further information about the use of the device.
DANGER Do not cover the device or charger during operation or while charging. This may cause the device/charger to overheat and potentially catch fire! CAUTION This device can generate high sound volumes. Never listen at high volumes for long periods. Doing so can result in immediate or gradual hearing damage. Remember: Permanent hearing damage may only emerge later in life. You may become used to listening to high volumes over time, making them appear normal to you.
Intended operating conditions Protect the device from extremely high or low temperatures and fluctuations in temperature. Use it at an ambient temperature between 10º C and 40º C. Do not place the device near a heat source and protect it from direct sunlight. Never expose the device to humidity, condensation or moisture. Ensure you use and store the device in a dust-free environment.
3) Technical specifications Technical specifications SurfTab Processor (CPU) Cortex A7 quad core processor, 1.2 GHz RAM 1 GB DDR3 Storage capacity 16 GB Graphics processing unit (GPU) Mali-400 MP2 Display type 10-point capacitive multi-touch IPS HD display Display size 10.1" (25.7 cm) Screen resolution 1280 x 800 Aspect ratio 16:10 Camera 5 MP / 2 MP Interfaces Micro-USB 2.0 (with host function), camera, memory card reader, audio out, microphone, WiFi, Bluetooth® 4.
Technical specifications USB power adapter Model: K-E30502000E1 Input voltage: 100 - 240 V ~, 50/60 Hz Input current: 0,35 A Output voltage: 5,0 V Output current: 2000 mA Manufacturer: Shenzhen Bestgk Technology Co., LTD. 4) Package contents • TrekStor SurfTab xiron 10.
A B D E F G H I J C K L EN 10
5) Controls and connections A) B) C) D) E) F) G) H) I) J) Front camera Touch screen Reset Microphone Volume Memory card slot Volume + Micro-USB socket / Charging socket Audio out socket On/off switch K) Rear camera L) Speaker 6) Charging the SurfTab Please fully charge your SurfTab before you use it for the first time. Connect your SurfTab to a plug socket using the USB cable and power adapter. The SurfTab is fully charged when the two-colour status LED turns yellow.
If you are using your new SurfTab for the first time, a configuration assistant will appear to help you configure the first important settings on your SurfTab. The settings that you specify here (for example, language or WiFi) can be altered again later on the applications menu under "SETTINGS".
9) Using the touch screen Scrolling The home screen of your SurfTab extends several pages to the right of the first window. You can set up these pages by placing apps or widgets on the possible further pages (see Section 10). Slide your finger from right to left (or the reverse) across the screen to access these pages. Above the quick start bar, the point bar displays the number of pages you have set up. The page you are currently on is highlighted.
Selecting an element To open an element or select an option, briefly touch the icon you require with your finger. If you want to close a recently used element (app, widget, menu), tap the display of all open elements. Place your finger on the element that you want to close and drag the element to the left or right to close it.
Enlarging and reducing the view You can enlarge the display of some views (images, websites etc.). Move two fingers apart on the screen to enlarge the display. In reverse, move two fingers towards each other on the screen to reduce the display again. Using the display keyboard If you tap a text field in order to enter text (for example, a Web address), the display keyboard appears. Enter the text in the usual way via the keyboard. Use the "?123" and "~[<" buttons to enter numbers and special symbols.
10) Personalising the home screen You can set up the home screen (as well as the additional pages) according to your wishes by adding or removing app shortcuts and widgets and altering the background. Adding apps to the home screen a) Tap the applications menu in the quick start bar on the home screen. A screen opens showing the apps and widgets that are currently available. Tap "APPS". b) Keep pressing the app that you have selected until the home screen appears.
Changing the screen background a) Touch an empty area of the screen background until on the lower edge of the screen a window with the following options appears: • Wallpaper • ES File Explorer • Gallery • Live Wallpaper • Photos b) Tap "WALLPAPER" or "LIVE WALLPAPER" to display the available backgrounds. c) Now scroll through the images, select a motif and confirm your selection via "SET WALLPAPER".
12) Connecting to the Internet via WiFi You can connect your SurfTab to the Internet via WiFi. If you would like to establish a connection to a new wireless network, proceed as follows: a) Select "SETTINGS" from the applications menu. This is where you will find the "WI-FI" item. Tap "WI-FI". b) Slide the on/off switch to the right. c) Now all available wireless networks will be displayed in the following window. d) Tap the network that you would like to connect to. An input window appears.
Removing an email account a) Select "SETTINGS" in the applications menu. b) Drag the list up until you can see "ACCOUNTS" and tap this option. Then tap the e-mail icon. c) Now tap the account that you wish to remove. d) Tap the three vertically stacked dots on the top right side and then select "REMOVE ACCOUNT". e) Confirm your selection once again via "REMOVE ACCOUNT" and the account will be deleted.
Uninstalling apps To remove apps you have installed on your SurfTab, proceed as follows: a) Tap "SETTINGS" in the applications menu. b) Drag the menu up with your fingertip until you can see "APPS". Tap "APPS". c) Drag the menu to the left with your fingertip until you reach the "DOWNLOADED" or "ALL" category. d) Tap the app that you want to remove with your fingertip and select "UNINSTALL" in the window that appears. Confirm once more with "OK" and the app will be uninstalled.
Accessing additional camera settings a) 3 vertically stacked dots appear on the upper right of the screen when camera mode is activated. Click here to: • switch between cameras (15 A) • display reference lines (15 C) or • activate the self timer (15 D). Tap the symbol to activate respectively to deactivate the respective mode. b) Slide your finger from left to right across the display. You can specify camera settings on the top right side of this window. To do so, tap the icon "Settings".
Zooming You can zoom in on or out of your subject both in photo and in video mode. Move two fingers apart on the screen to zoom in and move two fingers towards each other again to zoom out. To exit the camera mode, briefly tap the home icon on the lower edge of the display. 16) Connecting other devices Connecting the SurfTab to a computer a) Connect the SurfTab to your computer with the Micro-USB cable provided.
Connecting another device via Bluetooth® a) Select "SETTINGS" in the applications menu. You will find the "BLUETOOTH" item in the menu column. Tap "BLUETOOTH" with your fingertip. b) Slide the on/off switch for Bluetooth to the right. c) Activate the Bluetooth function on the device you want to connect and make the device visible to other Bluetooth devices, if necessary. To do so, refer to the instructions in the operating manual of the device.
If your television device does not support Miracast technology, a "Miracast dongle" can be used to connect the SurfTab via Miracast. In this case, you must ensure that the selected dongle is compatible with both the SurfTab and your television. 17) Activating standby mode If you do not want to use your SurfTab for a while, press the on/off switch briefly to put the SurfTab into standby mode and save power. To exit standby mode, briefly press the on/off switch again.
To restore the SurfTab to its factory settings, select the option "WIPE DATA/FACTORY RESET". Confirm your selection in the following menu by selecting "YES -- DELETE ALL USER DATA". WARNING: All the files that you have stored (photos, text files, bookmarks and so on) and the settings that you have specified (background, passwords and so on) will be deleted. g) To exit the recovery mode, use the volume button to select the "REBOOT SYSTEM NOW" option and confirm by pressing the on/off switch.
20) Notes on copyright and trademarks Copyright law prohibits the copying of the content of these operating instructions (illustrations, reference documents etc.), in whole or in part, without the permission of the copyright holder. Android and Google Play are trademarks of Google Inc. Use of these trademarks is subject to Google Permissions. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TrekStor GmbH is under license.
21) Notes on disposal Disposal This symbol indicates that this product and/or the battery used contain components that are harmful to the environment and/or human health if not disposed of correctly. As the owner of a used electrical or electronic device, you may not dispose of this device together with unsorted domestic waste. Remove the battery from the device before disposing of your old device.
E C D E C L A R AT I O N O F C O N F O R M I T Y As manufacturer and importer respectively: TrekStor GmbH, Berliner Ring 7, 64625 Bensheim, Germany ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ herewith de
Support information If you have questions about your TrekStor product or problems, please proceed as follows: • • • • Take a look at our FAQ section, where you will find answers to the most frequently asked questions about your product. Carefully read the operating instructions. The detailed operating instructions are available under "Downloads" or on the respective product detail page under "Download".
