User manual
Table Of Contents
- 1) About the SurfTab
- 2) Safety information
- 3) Technical specifications
- 4) Package contents
- 5) Controls and ports
- 6) Starting up the SurfTab for the first time
- 8) Home screen and desktop view
- 9) Charm Bar
- 10) Using and setting up the home screen
- 11) Connecting the SurfTab to the Internet
- 12) Activating Office 365 Personal
- 13) Downloading applications from the Windows Store
- 14) Transferring files between the SurfTab and other devices
- 15) Connecting the SurfTab to a television
- 16) Using the camera
- 17) Automatic Windows Update function
- 18) Performing a system backup
- 19) Reset and recovery
- 20) Switching off the SurfTab
- 21) Notes on copyright and trademarks
- 22) Notes on disposal
- 23) Notes on liability and warranty
EN
23
c) Open the Charm Bar by swiping your finger inwards from the right-hand
edge of the screen.
d) Tap "
DEVICES" in the Charm Bar.
e) Now tap "
PROJECT".
f) Tap "
ADD A WIRELESS DISPLAY". The SurfTab now searches for available Miracast
devices nearby. A list of all available Miracast devices then appears.
g) Tap the device that you wish to connect to.
h) A short time later, the selected device will show the display of the SurfTab.
If your television device does not support Miracast technology, a "Miracast dongle"
can be used to connect the SurfTab via Miracast. In this case, you must ensure that
the selected dongle is compatible with both the SurfTab and your television.
16) Using the camera
A camera application is already installed on your SurfTab. It is available on the
home screen as a live tile with a camera symbol. Tap the tile to open the camera.
The following screen appears:
Taking a photo
Tap the photo camera symbol on the right side of the screen to take a photo.