EN SurfTab® breeze 9.
Contents 1) About the SurfTab breeze 9.
Defining settings for 3G mode …………………………………………… 19 Removing the SIM card …………………………………………………… 20 14) Setting up/removing an email account ……………………………… 20 Setting up an email account ……………………………………………… 20 Removing an email account ……………………………………………… 21 15) Installing/uninstalling apps …………………………………………… 21 Downloading and installing apps ………………………………………… 21 Uninstalling apps ………………………………………………………… 22 16) Using the phone function ……………………………………………… 22 17) Using navigation ………………………………………………………… 22 Navigating w
We hope you enjoy your TrekStor SurfTab breeze 9.6 quad 3G. Please read the following passages carefully to familiarise yourself with the functions of this product and how to operate it. IMPORTANT! Follow the safety information in Section 2. IMPORTANT! These operating instructions are part of the product and contain important information in regard to safety, use and disposal of the tablet. Please keep these instructions in a safe place for future reference.
2) Safety information These instructions use the following warning symbols and key words: DANGER Indicates possible danger to life and/or danger of severe, irreversible injuries. CAUTION Follow instructions to avoid injuries and material damage. WARNING Follow instructions to avoid material damage. NOTE Further information about the use of the device.
DANGER Do not cover the device or charger during operation or while charging. This may cause the device/charger to overheat and potentially catch fire! CAUTION This device can generate high sound volumes. Never listen at high volumes for long periods. Doing so can result in immediate or gradual hearing damage. Remember: Permanent hearing damage may only emerge later in life. You may become used to listening to high volumes over time, making them appear normal to you.
Intended operating conditions Protect the device from extremely high or low temperatures and fluctuations in temperature. Use it at an ambient temperature between 10º C and 40º C. Do not place the device near a heat source and protect it from direct sunlight. Never expose the device to humidity, condensation or moisture. Ensure you use and store the device in a dust-free environment.
3) Technical specifications Technical specifications SurfTab Processor (CPU) Intel® Atom™ x3-C3230RK processor (1 M Cache, bis zu 1,2 GHz), quad core RAM 1 GB DDR3 Storage capacity 16 GB Graphics processing unit (GPU) Mali-450 MP4 Display type 5-point capacitive multi-touch IPS HD display Display size 9.6" (24.3 cm) Screen resolution 1280 x 800 Aspect ratio 16:10 Camera 2 MP / 0,3 MP Interfaces Micro-USB 2.
Technical specifications USB power adapter Model: PS10E050K2000EU Input voltage: 100 - 240 V ~, 50/60 Hz Input current: 0,35 A Output voltage: 5,0 V Output current: 2000 mA Manufacturer: Shenzhen Flypower Technology Co., LTD. 4) Package contents • TrekStor SurfTab breeze 9.
G EN 10 SurfTab breeze 9.6 quad 3G C H I J Designed in Germany | Made in China TrekStor GmbH, Berliner Ring 7 64625 Bensheim, Germany B M.No.
5) Controls and connections A) Front camera B) Rear camera C) Audio port D) Micro-USB socket / Charging socket E) On/off switch F) Volume control G) SIM card slot H) Memory card slot I) Microphone J) Speaker 6) Charging the SurfTab Please fully charge your SurfTab before you use it for the first time. Connect your SurfTab to a plug socket using the USB cable and power adapter. The SurfTab is fully charged when the two-colour status LED turns yellow.
8) Elements on the home screen A) Google™ Search B) Google™ language search C) Back to the previous screen D) Home icon (back to the home screen) E) Applications menu F) View all open elements G) Quick start bar EN 12
9) Using the touch screen Scrolling The home screen of your SurfTab extends several pages to the right of the first window. You can set up these pages by placing apps or widgets on the possible further pages (see Section 10). Slide your finger from right to left (or the reverse) across the screen to access these pages. Above the quick start bar, the point bar displays the number of pages you have set up. The page you are currently on is highlighted.
Selecting an element To open an element or select an option, briefly touch the icon you require with your finger. If you want to close a recently used element (app, widget, menu), tap the display of all open elements. Place your finger on the element that you want to close and drag the element to the left or right to close it.
Enlarging and reducing the view You can enlarge the display of some views (images, websites etc.). Move two fingers apart on the screen to enlarge the display. In reverse, move two fingers towards each other on the screen to reduce the display again. Using the display keyboard If you tap a text field in order to enter text (for example, a Web address), the display keyboard appears. Enter the text in the usual way via the keyboard. Use the "?123" and "~[<" buttons to enter numbers and special symbols.
10) Personalising the home screen You can set up the home screen (as well as the additional pages) according to your wishes by adding or removing app shortcuts and widgets and altering the background. Adding apps to the home screen a) Tap the applications menu in the quick start bar on the home screen. A screen opens showing the apps that are currently available. b) Keep pressing the app that you have selected until the home screen appears.
Changing the screen background a) Touch an empty area of the screen background until "WALLPAPERS" appears on the lower edge of the screen. Tap the symbol to display the available backgrounds. b) Now scroll through the images, select a motif and confirm your selection via "SET WALLPAPER". Use the "PICK IMAGE" icon to set one of your own images as the background. 11) Setting up a screen lock To make the data on your SurfTab more secure, we recommend that you set up a screen lock.
12) Connecting to the Internet via WiFi You can connect your SurfTab to the Internet via WiFi. If you would like to establish a connection to a new wireless network, proceed as follows: a) Select "SETTINGS" from the applications menu or the quick menu. This is where you will find the "WI-FI" item. Tap "WI-FI". b) Slide the on/off switch to the right. c) Now all available wireless networks will be displayed in the following window. d) Tap the network that you would like to connect to.
Do not insert any microSD/SDHC memory cards into the SIM slot! If a memory card does become stuck in the SIM slot, have it removed by a trained professional. c) Put the SIM card holder back in. When you switch on your SurfTab again after inserting the SIM card, you have to enter the corresponding PIN number. Defining settings for 3G mode There are various options for adjusting 3G mode to suit your requirements. These can be found under "SETTINGS". SIM cards Tap "SIM CARDS".
Data usage You can limit your data usage here. Mobile data Drag the slider to the right of "MOBILE DATA" to the right in order to activate the data service and to the left to deactivate it. Set mobile data limit Drag the slider to the right of "SET MOBILE DATA LIMIT" to the right if you would like to limit your data usage. Confirm the message for "LIMITING DATA USAGE" by tapping "OK".
e) You can specify further account settings in the next steps. Confirm the settings that you have specified with "NEXT". As soon as you have set up the account according to your wishes, the email app is ready for use. Removing an email account a) Select "SETTINGS" in the applications menu. b) Drag the list up until you can see "ACCOUNTS" and tap this option. Then tap the e-mail icon. c) Now tap the account that you wish to remove.
Uninstalling apps To remove apps you have installed on your SurfTab, proceed as follows: a) Tap "SETTINGS" in the applications menu. b) Drag the menu up with your fingertip until you can see "APPS". Tap "APPS". c) Drag the menu to the left with your fingertip until you reach the "DOWNLOADED" or "ALL" category. d) Tap the app that you want to remove with your fingertip and select "UNINSTALL" in the window that appears. Confirm once more with "OK" and the app will be uninstalled.
18) Using the camera Tap the camera icon in the applications menu or in the quick start bar. The following screen appears: Taking a photo Hold the SurfTab with the camera in the required direction and press the shutter button (18 A). The picture is saved and the SurfTab briefly displays a preview of the photo. Accessing additional camera settings a) On the top right of the screen you will find three vertically stacked dots. Tap the dots to adjust to your desired shooting mode.
b) The palette icon (18 B) on the bottom right allows you to access colour effect shooting options. Just tap the icon and select the desired option. To exit the camera mode, briefly tap the edge of the display to show the task bar. Editing photos a) Briefly tap the lower edge of the display to show the task bar. Now tap the home icon to exit camera mode. b) Open the gallery by tapping the "PHOTOS" symbol in the applications menu or in the quick start bar. c) Now tap the photo that you would like to edit.
19) Connecting other devices Connecting the SurfTab to a computer a) Connect the SurfTab to your computer with the Micro-USB cable provided. b) A short moment later, the memory of the SurfTab will be shown as an external drive in your computer’s file explorer. From here you can load, copy, delete or move files as usual. Connecting a USB device External USB devices such as USB-Sticks can be connected directly via the Micro-USB socket of the SurfTab or by using the Micro-USB host adapter cable provided.
Connecting to a television via Miracast™ Miracast technology is a peer-to-peer standard for image transfer. The SurfTab supports this standard and enables wireless transfer of image and sound from the SurfTab to a WiFi and Miracast-enabled television device. The SurfTab can connect to your television via Miracast only if the television also supports Miracast technology. Please check with your television manufacturer if necessary.
Standby mode is activated automatically when the SurfTab is not used for a certain time. You can specify the period of time after which the SurfTab automatically goes into standby mode under "SETTINGS" + "DISPLAY" + "SLEEP". 21) Reset and recovery mode Resetting the SurfTab (Reset) If your SurfTab freezes and no longer responds, you can force a shutdown by pressing and holding the on/off switch for approximately 10 seconds. Then you can the SurfTab switch on again as usual.
23) Notes on copyright and trademarks Copyright law prohibits the copying of the content of these operating instructions (illustrations, reference documents etc.), in whole or in part, without the permission of the copyright holder. Intel, Intel Core M and the Intel Inside logo are trademarks of Intel Corporation in the U.S. and/or other countries. Android and Google Play are trademarks of Google Inc. Use of these trademarks is subject to Google Permissions.
24) Notes on disposal Disposal This symbol indicates that this product and/or the battery used contain components that are harmful to the environment and/or human health if not disposed of correctly. As the owner of a used electrical or electronic device, you may not dispose of this device together with unsorted domestic waste. Remove the battery from the device before disposing of your old device.
E C D E C L A R AT I O N O F C O N F O R M I T Y As manufacturer and importer respectively: TrekStor GmbH, Berliner Ring 7, 64625 Bensheim, Germany ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ herewith de
Support information If you have questions about your TrekStor product or problems, please proceed as follows: • • • • Take a look at our FAQ section, where you will find answers to the most frequently asked questions about your product. Carefully read the operating instructions. The detailed operating instructions are available under "Downloads" or on the respective product detail page under "Download".
