Quick Start Guide

Contacts at the bottom side of the down tube

1. 2. 3.

5.4.

1. 2.

3. 4.

ENGLISH

• Replacing battery-pack

Position the battery over the down tube (with some space between the seat tube and the lower end of

the battery) (1). Now, slide the battery-pack down onto the rail (2). Use the lever to lower the battery

carefully during the last phase of sliding, so that the connectors engage (3). Be sure that the

connector at the bottom of the battery and the connector on the docking engage properly. When the

battery is fully in place, push the lock in until it clicks (4). Do not ride the bike with the lock open.

4.7 Charging the battery-pack

Notice: Before charging, make sure that the system is switched off and never turn the system on

or off during charging. This prevents unintended activation of the system. Only use the power supply

approved for use with this bike. Charging with a non-original power supply may cause the battery

pack to overheat, catch ﬁre, or even explode. When charging, do not let the battery-pack or power

supply get wet – because of risk of electrical shock.

Instructions for Use