Operation Manual

Troubleshooting
Problem
Possible Cause
Solution
No Light on the
switch.
The steamer is not plugged
in.
Plug the steamer power cord into
an electrical outlet.
The household circuit
breaker has been tripped;
there is a blown fuse in the
electrical circuit.
Reset the household circuit
breaker or replace the blown fuse.
Contact an electrician or your
area’s electrical provider.
The steamer
heats up but
there is no
steam.
The water reservoir is
empty.
Refill the water reservoir.
There is mineral build- up in
the steamer.
Remove the mineral build –up.
The steamer flow
light? is flashing
There is mineral build-up in
the steamer.
It is normal for the flow of the
steam to stop for a few seconds. If
it stays off for longer periods,
check for mineral build-up.
Service
If you have any further questions about the product after reading this manual, please contact the Trebs
customer service: [e-mail].
Trebs BV
Thermiekstraat 1a, 6361 HB, Nuth, The Netherlands, Email: [e-mail], Internet: www.trebs.nl
CE