Block 10 & Block 12 K E Y B O A R D A M P L I F I E R S BLOCK10+ BLOCK12
Important Safety Instructions - English / Français I MPOR TA N T S A FET Y IN S TR U C TION S This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
4 6 5 7 11 9 8 10 12 Table of Contents Cover ..................................................................................................... a Important Safety Instructions - English / Français ...................................i Table of Contents....................................................................................ii Traynor Block 10 & Block 12 ................................................................. 1 Fully connected, your Block unit can ..........................
TYPE: YS1115 BLOCK 12 A-Z1615BR/1v0 Power On Left BLOCK 12 Amp IN MEMORY OF ADIL WILSON Right BLOCK 12 Amp Off DESIGNED & MANUFACTURED BY YORKVILLE SOUND • TORONTO, CANADA LINK: Use a stereo cable to link two BLOCK 12 units to create a left and right stereo system. The Link connection is designed to work with another BLOCK 12 only. LINK PAN: Use the LINK PAN control to adjust signals being sent to LINKED BLOCK 12s. BALANCE: The LINK PAN control also functions as a balance control for the Headphones.
Input Channels 2. Input clip LED The input clip LED located near the Power/Status LED, has been designed to monitor Channels 1-3 for clipping. It will turn on when the input signal from an audio source is too hot (or the gain is set too high). Adjust the channels individually while playing until the LED stops indicating clipping (it’s okay if the LED blinks briefly). Channel 1 3.
Master Section 13. Master Control The Master Volume controls the overall output level of the Block amplifier. 14. Headphones The Headphones jack is a standard ¼-inch TRS (stereo) phone jack. When used, it disconnects the audio to the speakers so you can listen privately. 15. Balance (Link Pan) Use the Link Pan control to adjust the balance of the left/right signals when using the Headphones or for left/right balance of the Linked Block amps. 16.
TYPE: YS1115 BLOCK 12 A-Z1615BR/1v0 Power On Left BLOCK 12 Amp IN MEMORY OF ADIL WILSON Right BLOCK 12 Amp Off DESIGNED & MANUFACTURED BY YORKVILLE SOUND • TORONTO, CANADA LINK: Use a stereo cable to link two BLOCK 12 units to create a left and right stereo system. The Link connection is designed to work with another BLOCK 12 only. LINK PAN: Use the LINK PAN control to adjust signals being sent to LINKED BLOCK 12s. BALANCE: The LINK PAN control also functions as a balance control for the Headphones.
Canaux d’Entrée 2. DEL Clip d’entrée La DEL Clip d’entrée situé près de la DEL Power/Status, a été conçu pour surveiller l’écrêtage sur les canaux 1-3. Elle s’allume lorsque le signal d’une source audio est trop élevé (ou le gain est réglé trop haut). Régler les canaux individuellement tout en jouant jusqu’à ce que la DEL indique qu’il n’y a plus d’écrêtage (C’est pas grave si la DEL clignote brièvement). Canal 1 3.
12. Commande de Gain Le niveau pour le canal 4 est réglé à l’aide de la commande de Gain du Channel 4. Section Principale 13. Command Master Volume La commande Master Volume règle le niveau général de sortie de l’amplificateur Block. 14. Casque La prise casque est une prise standard ¼ de pouce PBM (stéréo). Lorsqu’utilisée, elle déconnecte l’audio aux hautparleurs, ainsi vous pouvez écouter en privé. 15.
Specifications - English Specifications 200 BLOCK10: 10-inch/200W BLOCK12: 12-inch/200W 1-inch/50-watts 20 - 20k 4 2 x 1/4-inch Gain, 2 band EQ 1/4-inch/XLR Gain, 3 band EQ Stereo 1/4-inch, Stereo 3.5mm Gain Yes 250 mV Balanced XLR (Pre/Post EQ, Pre Master) 1 Vrms Power, Ch. 1-3 Clip Thermal Yes BLOCK10: 13.75 x 18.75 x 14 BLOCK12: 14.3 x 21.25 x 14.65 BLOCK10: 35 x 48 x 36 BLOCK12: 36.5 x 54 x 37.5 BLOCK10: 28 / 12.6 BLOCK12: 33.5 / 15.
Spécifications - Français Spécifications 200 BLOCK10: 10-pouces/200W BLOCK12: 12-pouces/200W 1-pouce/50-watts Puissance Nominale de l'Enceinte (watts) Configuration de Haut-Parleur - Graves (Dimension / Puissance) Configuration de Haut-Parleur - Aigues (Dimension / Puissance) Réponse en Fréquence (Hz +/-3dB) Canaux d'Entrée Canal 1 - entrées Canal 1 - commandes Canal 2 - entrées Canal 2 - commandes Canal 3 - entrées Canal 3 - commandes Commande Master Volume Sensibilitée d'entrée (mV) Sortie Ligne (type /
TYPE: YS1115 Block Diagram for BLOCK 10 & BLOCK12 D E S I G N E D & M A N U FA C T U R E D B Y Y O R K V I L L E S O U N D CHANNEL 1 Gain CLIP CH 1 EQ BASS TREBLE 1/4-INCH CLIP CH 1 1/4-INCH Pre / Post Line Out CHANNEL 2 Gain CLIP CH 2 EQ GND LIFT BASS TREBLE Phones Pan 1/4-INCH XLR CHANNEL 3 Gain CLIP CH 2 LINK OUT 1/8-INCH CLIP CH 2 LINK IN 1/4-INCH Inside Cabinet + Gain CROSSOVER CHANNEL 4 / MONITOR IN Tweeter - 1/4-INCH + AMP BLOCK 10 = 10-inch woofer BLOCK 12 = 12-inch woo
Warranty - English / Français Two Year Warranty Unlimited Warranty Your Traynor two year unlimited warranty on this product is transferable and does not require registration with Yorkville Sound or your dealer. If this product should fail for any reason within two years of the original purchase date, simply return it to your Traynor dealer with original proof of purchase and it will be repaired free of charge.
WORLD HEADQUARTERS CANADA U.S.A. Yorkville Sound Limited Yorkville Sound Inc.
