User's Manual

EZ-PEAK LIVE DUAL

•

Charging Traxxas iD NiMH or LiPo Batteries

using the EZ-Peak Live App

When EZ-Peak Live Dual is connected, you have the ability to

configure the charger remotely from the app or you can use the

buttons on the charger. EZ-Peak Live Dual will not allow you to

start the charging process remotely via the app. It is important

to verify visually at the charger that the connected batter(ies)

match the charge mode indicated on the face of charger. Once

your charge settings are visually confirmed by you, press and hold

the Start button on the charger for 2 seconds to begin charging.

Once charging has started, you can view charge progress and

stop the charging process at any time from the app. When the

charge process is completed, the EZ-Peak Live App will play the

charge complete alert tone. These alerts can be adjusted in the

app settings. Follow the on-screen prompts to move through the

information screens provided in the app. If you have questions, tap

the Help button ? in the lower right of the app display.

iD Battery Specifications

Connected Chargers (up to 4)

iD-Only Safety Lock

The EZ-Peak Live App contains a passcode-protected safety lock that limits the charger to iD-only operation,

even when connected to the app on another iOS® or Android™ device. This feature allows the charger to be

locked so that inexperienced users (such as children) do not have access to manual settings for the charger and

the risks associated with using manual settings (see Warnings on page 2).