Datasheet

X-Maxx Wiring Diagram
3x10mm
FCS
3x10mm
BCS
3x8mm
CS
3x8mm
CS
3x10mm
BCS
3x10mm
FCS
Install the front LED light bar on
the front bumper using the two
included 3x8mm cap screws.
Plug the connector into
the high-voltage power
amplifier port A (white).
Route the connectors from the rear
light bar through the larger reamed
hole to the inside of the truck body.
Plug the short #7882 extension harness into
the high-voltage power amplifier ports (red
connector to C, blue connector to D).
Plug the other end (large black connector)
into the long #7882 extension harness.
Use the supplied zip ties to secure all wiring to the chassis.
5 X-MAXX 6 X-MAXX 7 X-MAXX
8 X-MAXX 9 X-MAXX
10 X-MAXX
FRONT
Rear LED Light
Bar Mount
Rear LED
Light Bar
Attach the rear LED
light bar to the mount
using the two included
3x10mm button-head
cap screws. Plug the
connectors (red and
blue) into the long #7882
extension harness.
Install the rear LED light bar mount
on the truck body using the two
included 3x10mm flat-head screws.
Rear LED
Light Bar
Front LED Light Bar (white)
Rear LED Light Bar (tail lights) (red)
Rear LED Light Bar (reverse lights) (blue)
Not used (yellow)
From Long Extension Harness /
Rear LED Light Bar on Body
High-Voltage High-Voltage
Power Amplier Power Amplier
WiringWiring
Front LED Light Front LED Light
Bar WiringBar Wiring