User's Manual

TQ i ADVANCED TUNING GUIDE
Set Multi-Function
knob for STEERING
SENSITIVITY (Expo)
Press/hold MENU
green LED blinks
Press SET
red LED blinks
x
8
Press SET to confirm
green LED blinks (x8)
Press/hold MENU
returns to driving mode
Set Multi-Function
knob for THROTTLE
SENSITIVITY (Expo)
Press/hold MENU
green LED blinks
Press SET
red LED blinks
x
2
Press MENU to confirm
red LED blinks (x2)
x
8
Press SET to select
green LED blinks (x8)
Press/hold MENU
returns to driving mode
Set Multi-Function
knob for STEERING
DUAL RATE (%)
Press/hold MENU
green LED blinks
Press SET
red LED blinks
x
3
Press MENU twice
red LED blinks (x3)
x
8
Press SET to select
green LED blinks (x8)
Press/hold MENU
returns to driving mode
Set Multi-Function
knob for BRAKING
PERCENTAGE (%)
Press/hold MENU
green LED blinks
Press SET
red LED blinks
x
4
Press MENU 3 times
red LED blinks (x4)
x
8
Press SET to select
green LED blinks (x8)
Press/hold MENU
returns to driving mode
Set Multi-Function
knob for
THROTTLE TRIM
Press/hold MENU
green LED blinks
Press SET
red LED blinks
x
5
Press MENU 4 times
red LED blinks (x5)
x
8
Press SET to select
green LED blinks (x8)
Press/hold MENU
returns to driving mode
Adjust the Multi-
Function knob until the
LED turns solid green.
To LOCK the
Multi-Function knob
Press/hold MENU
green LED blinks
Press SET
red LED blinks
x
6
Press MENU 5 times
red LED blinks (x6)
x
8
Press SET to lock
green LED blinks (x8)
Press/hold MENU
returns to driving mode
To REVERSE
the direction of
STEERING servo
Press/hold MENU
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
green LED blinks
Press SET
red LED blinks
x
8
Press SET to reverse
servo direction
Press/hold MENU
returns to driving mode
To set the SUB TRIM
of the STEERING
servo
Press/hold MENU
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
green LED blinks
Press SET
red LED blinks
x
2
Press MENU
red LED blinks (x2)
Use Multi-Function
knob to set neutral
x
8
Press SET
to save position
Press/hold MENU
returns to driving mode
To set the END
POINTS of the
STEERING servo
Press/hold MENU
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
green LED blinks
Press SET
red LED blinks
x
3
Press MENU twice
red LED blinks (x3)
Turn steering
wheel to desired max
left and right travel
x
8
Press SET
to save each position
Turn steering wheel
to test settings
IF END POINTS
ARE OK:
Press/hold MENU
returns to driving mode
IF END POINTS
NEED TO BE
CHANGED:
Press SET
and repeat steps 6-8
To reset the END
POINTS of STEERING
servo to defaults
Press/hold MENU
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
green LED blinks
Press SET
red LED blinks
x
4
Press MENU 3 times
red LED blinks (x4)
x
8
Press SET
to reset end points
Press/hold MENU
returns to driving mode
To REVERSE
the direction of
THROTTLE servo
Press/hold MENU
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
red LED blinks
x
8
Press SET to reverse
servo direction
Press/hold MENU
returns to driving mode
To set the SUB TRIM
of the THROTTLE
servo
Press/hold MENU
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
red LED blinks
x
2
Press MENU
red LED blinks (x2)
Use Multi-Function
knob to set neutral
x
8
Press SET
to save position
Press/hold MENU
returns to driving mode
To set the END
POINTS of the
THROTTLE servo
Press/hold MENU
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
red LED blinks
x
3
Press MENU twice
red LED blinks (x3)
Use throttle
trigger to set desired
max throttle or brake
Press SET to save
Use trigger to test
IF END POINTS
ARE OK:
Press/hold MENU
returns to driving mode
IF END POINTS
NEED TO BE
CHANGED:
Press SET
and repeat steps 7-9
To reset the END
POINTS of THROTTLE
servo to defaults
Press/hold MENU
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
green LED blinks
x
2
Press MENU
green LED blinks (x2)
Press SET
red LED blinks
x
4
Press MENU 3 times
red LED blinks (x4)
x
8
Press SET
green LED blinks (x8)
Press/hold MENU
returns to driving mode
MENU TREE FORMULAS
To select functions and make adjustments to the TQi transmitter without
referencing the menu tree, turn your transmitter on, find the function in the
left column you wish to adjust, and simply follow the corresponding steps .
Always turn your
transmitter on first.
1