TRA2973 8amp AC Fast Charger Manual

EZ-PEAK LIVE DUAL
•
21
The EZ-Peak Live Dual charger is set by default to only charge
iD-equipped batteries. You must turn off iD-Only Mode on the
Advanced Charger Settings screen of the app to manually
configure the charger settings to charge non-iD batteries.
You can also turn on and set up the passcode-protected safety lock on
this same screen.
2. Use the EZ-Peak Live App to select the battery type,
battery capacity, charge rate, and charging mode
(LiPo only).
The Charge Settings Wizard takes you through the setup
process by asking you questions about the battery you are
charging.
Follow the instructions in the app. Tap the Help button ?
in the lower right of the app display for more detail.
Charge Settings Wizard
Advanced Charger Settings