TRA2973 8amp AC Fast Charger Manual

EZ-PEAK LIVE DUAL
•
17
Charging Traxxas iD NiMH or LiPo Batteries
using the EZ-Peak Live App
When EZ-Peak Live is connected, you have the ability to configure
the charger remotely from the app or you can use the buttons
on the charger. EZ-Peak Live Dual will not allow you to start the
charging process remotely via the app. It is important to verify
visually at the charger that the connected batter(ies) match the
charge mode indicated on the face of charger. Once your charge
settings are visually confirmed by you, press and hold the Start
button on the charger for 2 seconds to begin charging. Once
charging has started, you can view charge progress and stop the
charging process at any time from the app. When the charge
process is completed, the EZ-Peak Live App will play the charge
complete alert tone. These alerts can be adjusted in the app
settings. Follow the on-screen prompts to move through the
information screens provided in the app. If you have questions, tap
the Help button ? in the lower right of the app display.
iD Battery Specifications
Connected Chargers (up to 4)
iD-Only Safety Lock
The EZ-Peak Live App contains a passcode-protected safety lock that limits the charger to iD-only operation,
even when connected to the app on another iOS® or Android™ device. This feature allows the charger to be
locked so that inexperienced users (such as children) do not have access to manual settings for the charger and
the risks associated with using manual settings (see Warnings on page 2).